Trying to find an 11" rotor that is 4x100 that does not have to be redrilled like the Prelude rotors. Does anyone have any experience with the VW rotors as far as backspacing and such. BTW these are going on an EG Civic with GSR spindles and ITR calipers.

 

I have the FastBrakes 11" front kit on my 92Si and it uses these rotors and Integra calipers. The only thing needed to make the rotors fit was a small aluminum ring for the hub, which was included in the kit.

 

always thought of that my self, but never tried it.

just go to napa and buy one, and measure out the backspacing and soforth...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaiJekBok &raquo;</TD></TR><TR><TD CLASS="quote">I have the FastBrakes 11" front kit on my 92Si and it uses these rotors and Integra calipers. The only thing needed to make the rotors fit was a small aluminum ring for the hub, which was included in the kit.</TD></TR></TABLE>

Could you post a pic of this set-up with the aluminum ring (I'm assuming it's a hub centric ring for the rotors)?

 

i remember helping my buddy(eg(6)sr) replacing it on his old carrado... i dont think it would possibly work... but then again the new K series motor fit EG's/EK's now.... PM him and see if he remebers, for me it was a blur.

 

I had some pics on a friend's server but it's toast. I'll pull one of the wheels tomorrow and snap some new pics.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaiJekBok &raquo;</TD></TR><TR><TD CLASS="quote">I had some pics on a friend's server but it's toast. I'll pull one of the wheels tomorrow and snap some new pics.</TD></TR></TABLE>

That would be great. Thanks alot.