I have a built block...eagle rods,darton sleaves and 86 mm pistons 12.5-1 compression .....i could be a little off on the compression ...anyways this block with a stock b16a head...would that work? just curious

 

stock head mated to built blocks are fine. as long as you know the limits of the motor due to the stock head. the bottom end maybe ready for the beating, but the head will still have its limits on revability.

Wil

 

Yes it should work fine, but with all that compression head porting should give a very noticeable gain when the time comes for it.

 

good stuff thanks alot.!!!!!