The head is in excellent condition. At least 9 of 10. The previous owner ran a really aggressive clutch with a really aggressive pressure plate and a stock flywheel on a stock engine and probably sat at stop lights with the clutch pushed in. The result was the thrust bearings fell out. The engine ran fine when pulled but would shut off when the clutch was depressed. The engine had well under 100,000 miles on it. I have pics posted below. I am looking for $330 as it sits. The head is from the SH model so has the more aggressive cams. No IM, throttle body, fuel rail or injectors. But I have connections with a local machine shop and can give you the head with a complete 3 angle valve job and surface for only $465. A 16 valve job and surface generally runs $250 or more.

 

Would also trade for a GSR head. I have H22A4 bottom end parts as well but the crank would need to be ground for thrust.

 

looking for any other trades?

 

GSR tranny. I would have to add some money though I guess. What do you have? I have a GSR Honda Challenge race car I am looking for back up parts for and a bone stock 88 CRX Si.

 

No love for the H22?

 

Make an offer. I need money to run a Honda Challenge race.