Well after about 2 years now of many persons on this forum and myself wondering how much WHP my 98 Itr would lay down, I have dyno'ed the R.

98 Itr with 75k, stock motor. Mods are:

-Comptech Icebox/K&N E2427/stock Upper Elbow
-OEM JDM 4-1
-SMSP 12" Test Pipe
-Buddy Club Spec 3
-Timing @ 17deg.

This setup along with Drag Radials netted consistent 13.7's@100mph at the drag strip and a Very Strong motor on the Road Course. I dynoed the car at http://www.hpworks.com. The owner says there Dyno is calibrated on the lower side also, as many will agree. It was 82deg F out side with 68% humidity.

 

Looks like a bs to me.

 

strong motor. i wish i can make 175whp with mine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smitdog &raquo;</TD></TR><TR><TD CLASS="quote">I dynoed the car at http://www.hpworks.com. The owner says there Dyno is calibrated on the lower side also, as many will agree.</TD></TR></TABLE>

Agreed. Nice numbers for that facility.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan &raquo;</TD></TR><TR><TD CLASS="quote">

Agreed. Nice numbers for that facility. </TD></TR></TABLE>

Thanks, I would like to go make a few more pulls on someone elses dynojet.

 

Ban

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote"> Ban</TD></TR></TABLE>

I quess banning me would make you feel better. I know the thought of the CW Rolling you at Beaver is not a pleasant one..........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smitdog &raquo;</TD></TR><TR><TD CLASS="quote">

I quess banning me would make you feel better. I know the thought of the CW Rolling you at Beaver is not a pleasant one.......... </TD></TR></TABLE>

Yeah and when my Gs-R rolls both of you it'll be hell on earth

Awesome numbers. You keep a good car Did you run any other "tweaks" ?

Off the top of my head I can think of:

-New cap/rotor
-Make sure timing belt is tight
-Injectors clean (flow well)
-Tire pressures
-Change oil
-Remove PS/AC (belts)

The PS alone will put you in the 190's

 

Your peak power holds well...very impressive for a non-tuned stock ITR motor. Numbers are strong. Get a hold of a hondata or uberdata and you'll easily break 190 without a doubt.

 

...don't hate....Nice numbers whitey

 

Nice numbers

 

Ahh, the power of CW.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92TypeR &raquo;</TD></TR><TR><TD CLASS="quote">Your peak power holds well...very impressive for a non-tuned stock ITR motor. Numbers are strong. Get a hold of a hondata or uberdata and you'll easily break 190 without a doubt.</TD></TR></TABLE>

Thanks. I am goin to leave things alone until something happens to my motor. I am goin to just learn to be faster and better on track now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by misfit &raquo;</TD></TR><TR><TD CLASS="quote">Looks like a bs to me. </TD></TR></TABLE>

Yeah I'm gonna have to agree! But I'm sure Ed will say that I'm drink and have no clue what I'm talking about

 

damn.. crazy numbers for stock itr!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtec.dc2 &raquo;</TD></TR><TR><TD CLASS="quote">damn.. crazy numbers for stock itr!</TD></TR></TABLE>

Thanks! HOws the boosted R?

 

all good.. soon to up the boost for 300+whp club.

 

The peak doesn't surprise me, but I thought you'd have a little more of a VTEC spike.

 

damn freak motors...

i'm jealous

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm wannabe &raquo;</TD></TR><TR><TD CLASS="quote">impressive for stock

</TD></TR></TABLE>

good *** numbers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpoonDC2R &raquo;</TD></TR><TR><TD CLASS="quote">

good *** numbers </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">Yeah I'm gonna have to agree! But I'm sure Ed will say that I'm drink and have no clue what I'm talking about </TD></TR></TABLE>

What a pleasant surprise!
I'm jealous .... hehe.

Just got home from the R-Speed BBQ.
Did a side trip through Atlantic City.

Thanks Dan. Nice meeting everyone.
I'll post some pics in a few hours, or something.

 

I'm jealous. My R minus the aftermarket exhaust only made 173 whp.

 

Nice numbers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR &raquo;</TD></TR><TR><TD CLASS="quote">damn freak motors...

i'm jealous </TD></TR></TABLE>

Roll a Tran???

&lt;--- Runs for Cover.........