parting out my hatch, please buy my stuff! Seattle, WA area.
Ok, so my block is junk, and I cannot find any local LS blocks...SO SPEAK UP NOW IF YOU KNOW OF ANY!!!! If I don't find one by the end of Thursday, I will start ripping this car apart and selling off any and everything. All of the prices are OR BEST OFFER! I don't have any pictures yet, but let me know and I can take some shitty ones with my camera phone, or I will meet up with anybody interested. Complete parts list is:
INTERIOR
SOLD - USDM ITR front seats, suede is worn, cloth is clean, w/EG/DC rails
SOLD - JDM EG6 rear interior panels/seats *PENDING*
$ 250 - Del Sol seats, red stripes, w/EG/DC rails, condition 7/10
SOLD - JDM EG6 sunvisors w/JDM writing
SUSPENSION
SOLD - Koni yellow full adjustable struts
SOLD - Ground Control Integra coilovers - or $450 w/struts
$ 75 - Neuspeed black front upper strut tower bar
SOLD - GSR rear lower control arms w/swaybar mount holes
SOLD - '92+ Si stock front swaybar w/LCA's
SOLD - ITR stock springs, full set
$ 140 - Suspension Techniques F/R swaybar set *for 99/00 SI*
SOLD - CTR/SI front swaybar *FOR EK*
SOLD- '92+ Si stock front swaybar W/OUT LCA's
DRIVETRAIN
$ 150 - '94 LS head, machined true, new valve guide seals, semi-fresh valve grind, complete internals, no distributor
$ 75 - '91 LS head, bare, not machined.
$ 100 - '00 B16 PR3 pistons on LS rods *USED* *will include NEW rings for $75*
$ 75 - '91 LS intake manifold w/insulated gasket, *do-it-yourself port-job, not finished* includes fuel rail and regulator, no injectors
$ 100 - '00 B16 injectors w/harness plugs to cut/splice, 240cc, I cleaned these in our ultrasonic cleaner at work less than 500 miles ago!
SOLD - '00 B16 transmission, less than 20k miles, guaranteed perfect to 7400 in each gear(it was on an LS engine in my car)
$ 50 - '00 ITR clutch, under 1k miles
$ 50 - under 500 mile old clutch slave cylinder (I dare you to price one from Honda)
$ 30 - under 500 mile old NGK replacement spark plug wires
$ 75 - CTR N1 crank pully w/new belt
$ 300 - Spoon Sports 9 pound lightweight flywheel w/new in box pilot bearing
$ 300 - APEXi GT spec B16 manifold, no dents. Stainless steel, 2.25"
$ 75 - '98 GSR starter
$ 110 - '00 GSR complete engine mount set for EG/DC *with the better, aluminum driver side mount*
SOLD - '00 GSR axles, only on lowered car for under 500 miles
$ 65 - '00 GSR intermediate shaft
$ 50 - Civic radiator, guaranteed good. I will give whoever buys this the receipt from where I got it from
SOLD - ITR muffler. No flange on it, $25 or so at Dan Fast or similar place
SOLD - stock '92 Si midpipe, good for EG's w/swaps
SOLD- stock '92 Si catalytic convertor
SOLD - GSR tranny, year is unknown, I don't know what is wrong with the internals, the diff and the case are good.
SOLD - SOHC D series shift linkage, 3 sets
SOLD - GSR crank, year is unknown, looks good, no spun bearing abnormal wear or anything like that.
SOLD - '00 B16 crank, looks better than the GSR
$ 100 - B16 cams w/the newer style cam holders w/squirters. Year/mileage unknown, but still look good.
Shell is sold.
Let me know if you are interested in anything listed and I will do my best to make sure that you get it in a timely matter. You can either email me at pliggity@hotmail.com, AIM me at pliggity, or call my cell if you're local and want to meet up at 206.235.9042. I need ALL of this stuff gone ASAP because I am moving out in a matter of weeks and will not have any place for storing all of these parts for a long time. Thanks for reading, Pat.
Modified by PliggityPB at 8:59 AM 5/15/2004
Modified by PliggityPB at 1:46 PM 5/22/2004
Modified by PliggityPB at 12:14 PM 5/24/2004
Modified by PliggityPB at 1:53 PM 6/2/2004
Modified by PliggityPB at 4:43 PM 6/14/2004
INTERIOR
SOLD - USDM ITR front seats, suede is worn, cloth is clean, w/EG/DC rails
SOLD - JDM EG6 rear interior panels/seats *PENDING*
$ 250 - Del Sol seats, red stripes, w/EG/DC rails, condition 7/10
SOLD - JDM EG6 sunvisors w/JDM writing
SUSPENSION
SOLD - Koni yellow full adjustable struts
SOLD - Ground Control Integra coilovers - or $450 w/struts
$ 75 - Neuspeed black front upper strut tower bar
SOLD - GSR rear lower control arms w/swaybar mount holes
SOLD - '92+ Si stock front swaybar w/LCA's
SOLD - ITR stock springs, full set
$ 140 - Suspension Techniques F/R swaybar set *for 99/00 SI*
SOLD - CTR/SI front swaybar *FOR EK*
SOLD- '92+ Si stock front swaybar W/OUT LCA's
DRIVETRAIN
$ 150 - '94 LS head, machined true, new valve guide seals, semi-fresh valve grind, complete internals, no distributor
$ 75 - '91 LS head, bare, not machined.
$ 100 - '00 B16 PR3 pistons on LS rods *USED* *will include NEW rings for $75*
$ 75 - '91 LS intake manifold w/insulated gasket, *do-it-yourself port-job, not finished* includes fuel rail and regulator, no injectors
$ 100 - '00 B16 injectors w/harness plugs to cut/splice, 240cc, I cleaned these in our ultrasonic cleaner at work less than 500 miles ago!
SOLD - '00 B16 transmission, less than 20k miles, guaranteed perfect to 7400 in each gear(it was on an LS engine in my car)
$ 50 - '00 ITR clutch, under 1k miles
$ 50 - under 500 mile old clutch slave cylinder (I dare you to price one from Honda)
$ 30 - under 500 mile old NGK replacement spark plug wires
$ 75 - CTR N1 crank pully w/new belt
$ 300 - Spoon Sports 9 pound lightweight flywheel w/new in box pilot bearing
$ 300 - APEXi GT spec B16 manifold, no dents. Stainless steel, 2.25"
$ 75 - '98 GSR starter
$ 110 - '00 GSR complete engine mount set for EG/DC *with the better, aluminum driver side mount*
SOLD - '00 GSR axles, only on lowered car for under 500 miles
$ 65 - '00 GSR intermediate shaft
$ 50 - Civic radiator, guaranteed good. I will give whoever buys this the receipt from where I got it from
SOLD - ITR muffler. No flange on it, $25 or so at Dan Fast or similar place
SOLD - stock '92 Si midpipe, good for EG's w/swaps
SOLD- stock '92 Si catalytic convertor
SOLD - GSR tranny, year is unknown, I don't know what is wrong with the internals, the diff and the case are good.
SOLD - SOHC D series shift linkage, 3 sets
SOLD - GSR crank, year is unknown, looks good, no spun bearing abnormal wear or anything like that.
SOLD - '00 B16 crank, looks better than the GSR
$ 100 - B16 cams w/the newer style cam holders w/squirters. Year/mileage unknown, but still look good.
Shell is sold.
Let me know if you are interested in anything listed and I will do my best to make sure that you get it in a timely matter. You can either email me at pliggity@hotmail.com, AIM me at pliggity, or call my cell if you're local and want to meet up at 206.235.9042. I need ALL of this stuff gone ASAP because I am moving out in a matter of weeks and will not have any place for storing all of these parts for a long time. Thanks for reading, Pat.
Modified by PliggityPB at 8:59 AM 5/15/2004
Modified by PliggityPB at 1:46 PM 5/22/2004
Modified by PliggityPB at 12:14 PM 5/24/2004
Modified by PliggityPB at 1:53 PM 6/2/2004
Modified by PliggityPB at 4:43 PM 6/14/2004
Are you parting out your hatchback as the title says...or just the parts you have listed? If you are parting out your hatchback...how much for the 2 inner door lock tabs..both the driver/passenger side. I just need the tabs only..if they are not broken or if you want to sell me the whole lock assebly, let me know..
thanks
thanks
Sorry, I'm only selling all the parts listed for now and the rolling car as a whole, but if the person who is interested in the shell doesn't want things, I will post everything available at that time. Thanks.
I'll take the front Si sway bar w/o the LCAs. I can pick up or meet you, please IM me and we can work something out. I'm also interested in the Konis and Ground Controls. What are the rates on the GCs? And how long has the suspension been used for?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PliggityPB »</TD></TR><TR><TD CLASS="quote">Sorry, I'm only selling all the parts listed for now and the rolling car as a whole, but if the person who is interested in the shell doesn't want things, I will post everything available at that time. Thanks.</TD></TR></TABLE>
No problem..thanks
No problem..thanks
Honda-Tech Member

Joined: Feb 2002
Posts: 14,490
Likes: 0
From: just when you thought you were different, WA, NWforLIFE
bump for a cool guy....good seller..the eg6 interior has been spoken for, hit me up. peace
toto
toto
Trending Topics
EG6 interior is spoken for
Let me know guys, I need this gone in under a week and a half. MAKE OFFERS!!!
Let me know guys, I need this gone in under a week and a half. MAKE OFFERS!!!
Updated list again.
Just make offers if you're interested in something, I'm very willing to negotiate and make a deal. I need this stuff gone ASAP!!! I can get plenty of vouches together I'm sure, from a couple different forums. I know hella peeps on *********** will vouch. Let me know. Thanks, Pat.
Just make offers if you're interested in something, I'm very willing to negotiate and make a deal. I need this stuff gone ASAP!!! I can get plenty of vouches together I'm sure, from a couple different forums. I know hella peeps on *********** will vouch. Let me know. Thanks, Pat.
Updated. Please just make offers if you're interested. I really need to get rid of all this stuff ASAP!!!! I have nowhere to store anything. Thanks, Pat.
cool deal. let me know.
make offers on this stuff, i'll let **** go for cheaper than listed! i really really need all of this gone!
make offers on this stuff, i'll let **** go for cheaper than listed! i really really need all of this gone!
the piece of **** shell was from you, you should know what it looked like...minus all of the gay *** white painted interior/exterior things. but it's gone now.
Thread
Thread Starter
Forum
Replies
Last Post
FlatBrokeHatch
Northeast (Sales)
71
Jun 17, 2012 05:08 PM
FlatBrokeHatch
For Sale
74
Jun 17, 2012 04:33 AM




