FS- GSR tranny with Quaife LSD
Thread Starter
Honda-Tech Member
Joined: Aug 2001
Posts: 1,937
Likes: 0
From: Brooklyn, NY, USA
FS- GSR tranny with Quaife LSD
Tranny has one mile on it since Quaife install (to verify everything was installed).
New ITR type bearings were installed instead of the weird angled bearings that are standard on GSRs.
It only needs the pass side axle seal replaced. The seal is like $5 and you don't need to take the tranny apart to fix it.
Synchros are in GREAT shape. The tranny has 40k on it.
Quifes got for about $830 shipped. A tranny in this shape is worth at least $750. New bearings were $50+ cost of pressing on/off
This thing is ready to bolt on and go, saving you the downtime of installing the LSD.
Hydro tranny.
$1500 shipped
New ITR type bearings were installed instead of the weird angled bearings that are standard on GSRs.
It only needs the pass side axle seal replaced. The seal is like $5 and you don't need to take the tranny apart to fix it.
Synchros are in GREAT shape. The tranny has 40k on it.
Quifes got for about $830 shipped. A tranny in this shape is worth at least $750. New bearings were $50+ cost of pressing on/off
This thing is ready to bolt on and go, saving you the downtime of installing the LSD.
Hydro tranny.
$1500 shipped
Thread
Thread Starter
Forum
Replies
Last Post
having tranny problems on a gsr need to know where i could rebuild a tranny at in nj and roughly how
undagroundrican
Acura Integra
3
Dec 10, 2005 01:35 AM
hatchbackhonda
Honda Civic / Del Sol (1992 - 2000)
4
Jul 27, 2004 03:24 PM
