Frion is out and was wondering if anyone else has run out before. Can you take it anywhere to get it recharged? How much? What type of frion? How long does it take? Just want to make sure I have all the little details before taking it somewhere.

 

I have not re-charged mine yet, But from my understanding- the 134a our cars use is an off the shelf item and can be bought for cheap. As for putting it in, I dunno

wish I could help more...

 

just go to autozone etc. and get the recharge kit.. cost about 45.00 and just follow directions,,, take about 30 minutes or less.. real easy... car will take two cans ...and your done.....

 

What about Jiffy L00B?

 

You must use your air a lot. My 97' still has yet to be recharged as far as I know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">What about Jiffy L00B? </TD></TR></TABLE>

Looking for trouble???

Try the local Sears...
or better shop around.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">What about Jiffy L00B? </TD></TR></TABLE>

screw them.. do it yourself its easy.. besides i think they only do loobs and oil changes....

besides their might be some stunnas there that might want to steal your car...

just get the recharge kit , pepboys, auotozone, kragen......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">What about Jiffy L00B? </TD></TR></TABLE>

seriously Marc, it's easy to do with the kit..

if you really don't want to do it, have someone more reputable than jifffy l00b do it..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">Frion is out and was wondering if anyone else has run out before. Can you take it anywhere to get it recharged? How much? What type of frion? How long does it take? Just want to make sure I have all the little details before taking it somewhere.</TD></TR></TABLE>Bye the frion take it to the dealership the frion is whats really $$$ at the dealer, let them do it it will coast you no more then $80 to put it in but you will no that it was done right and most likeley thay will not even charge you half of that because it takes about ten to fiften min to do.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mstewar &raquo;</TD></TR><TR><TD CLASS="quote">

seriously Marc, it's easy to do with the kit..

if you really don't want to do it, have someone more reputable than jifffy l00b do it..</TD></TR></TABLE>

why don't you drive down here and do it.

 

I have your Qote in my R on the sun viser its a pin with an angel, it was a gift.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">

why don't you drive down here and do it. </TD></TR></TABLE>

drive to Socal and ill do it for free its really that easy bro... and F the dealership. even doing to the work for half is a rip off...

$40 bucks and 30minutes bro and you are done...

trust me you will kick yourself how easy it is....

 

cxSHOE do you no were i can get one of thoes boots for the car .

 

Look at his Sig

http://members.aol.com/chevychrgr/boot.jpg

 

look in my sig. and just email that website and they will answer all your questions.

 

I've been calling around to get it done for my old beater which uses R12, and I've been told it ranged from $150 to $180.

To me, thats freaking insane. Anyone in Chicago know anyone that does this kind of work?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cxSHOE &raquo;</TD></TR><TR><TD CLASS="quote">look in my sig. and just email that website and they will answer all your questions.
</TD></TR></TABLE>Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RealTypeR &raquo;</TD></TR><TR><TD CLASS="quote">

why don't you drive down here and do it. </TD></TR></TABLE>

drive? to southern FL? hah..

i'd be on a jet plane.. you got my airfare? i'll come take care of it..

 

just went to a local acura dealer and they quoted me atleast $105 on the recharge...my dad used to have a dealership and all it took was a can or two of frion and it IS hella easy....cant beleive acura would charge me more than $105

 

I did it in an R that came through our Honda/Acura bodyshop when i used to work there last year. Car had 29k on it...

 

Kmart's the cheapest...they have the entire recharge kit for $20 with a can of R134a. Just charged my mom's A/C in her Accord when I was in Dallas. It's simple to do, they can train retarded chimps to do it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fat Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">Kmart's the cheapest...they have the entire recharge kit for $20 with a can of R134a.</TD></TR></TABLE>

you will need two cans, no more no less..once the a/c is discharged completely.

 

1 1/2 to be exact

 

A/C is for pussies anyway...Real R's didn't come with it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fat Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">A/C is for pussies anyway..</TD></TR></TABLE>

move to Florida and tell me how you feel....