Getting out of the hobby for a while guys; have some new priorities

Anyway, ALL ITEMS ARE OBO
Some items I have included shipping, some not

All these items were pulled in good working condition. Some items have cosmetic flaws but thats its. Pictures are available upon request. Requests for specific pictures will be honored as well.

As for payment methods, I take paypal (preferred) and money orders. No personal checks. I will consider other forms of online payment such as Western Union.

All items will also be shipped via Fedex ground from Jacksonville, Florida unless you wish to make other shipping arrangements. Pick-up is available.

E-mail me with any questions or concerns.

...and now for the goods.

Engine
-1992 B18A(LS) Block $1200+shipping
-Golden Eagle MFG Godzilla Sleeves (85.5mm bore)
-JE Pistons (9.5:1 C/R)
-Import Builders spec Wiseco piston rings
-Eagle Rods
-ACL Main and Rod Bearings
-ITR Oil Pump
-ITR Water Pump
http://www.imagestation.com/pi...b.jpg
http://www.imagestation.com/pi...9.jpg
http://www.imagestation.com/pi...f.jpg
http://www.imagestation.com/pi...4.jpg

1998 B18C1(GSR) Cylinder Head $1200+shipping
-JG Pro Series Port and Polish
-Crower Retainers
-Crower Dual Valve Springs
-Ferrera SS Valves (exhaust .5mm oversized)
http://www.imagestation.com/pi...3.jpg
http://www.imagestation.com/pi...5.jpg
http://www.imagestation.com/pi...3.jpg

-JG Victor X intake manifold SOLD
http://www.imagestation.com/pi...2.jpg
(TB not included)

Turbo Stuff
-LoveFab SST exhaust manifold $600 shipped
http://www.imagestation.com/pi...5.jpg
http://www.imagestation.com/pi...1.jpg

-Precision SC61 .60/.63 SOLD
http://www.imagestation.com/pi...9.jpg
http://www.imagestation.com/pi...5.jpg
-PWR 24x8x3 Intercooler $350 shipped
(email for details)
http://www.imagestation.com/pi...c.jpg
http://www.imagestation.com/pi...1.jpg
http://www.imagestation.com/pi...2.jpg

-Tial black 50mm blow-off valve SOLD
http://www.imagestation.com/pi...0.jpg

Drivetrain
-'98 GSR Hydro Transmission SOLD
-Quaife LSD
(no grinds and everything was checked upon install of LSD)

Action 2md Clutch (disk and PP) $200 shipped
http://www.imagestation.com/pi...e.jpg
http://www.imagestation.com/pi...9.jpg
Exedy Flywheel $200 shipped

Fuel, Ignition, Engine Management
CPR 75lb Injectors (787.5cc) SOLD
Golden Eagle Fuel Rail SOLD
Holley 255 fuel pump $100 shipped

Aeromotive 8an FPR (fittings incl. $100 shipped
http://www.imagestation.com/pi...d.jpg

Aeromotive Fuel Filter $50 shipped
http://www.imagestation.com/pi...8.jpg

Autometer Boost guage (sportcomp) SOLD
Autometer AFR guage (phantom) SOLD
NGK Plug Wires $25 shipped


Remember, all items are OBO.
Paypal users, please add 3%.

More items will be added later. So keep posted.
I will also be posting pictures of some stuff later.
Otherwise, pictures will be available upon request.

Thanks,
David
azndav83@aol.com


Modified by Vadian at 7:18 PM 5/15/2004


Modified by Vadian at 12:25 AM 5/19/2004


Modified by Vadian at 1:44 PM 5/19/2004


Modified by Vadian at 12:55 PM 5/20/2004

 

Hi,
I'd be interested in the intake manifold, ... got any pictures?
Have you done a lot of business on here before? Do you have any references?

Edit: I just noticed its for GSR-head.... can' t use it on my b16a/b18c5.... my bad, sorry!

 

Yes sir, you are correct. Sorry I should have been more specific.

As for references, I've done alot of my business with Kyle from Wiredspeedlab, Viren (b18bturbo), Earl, Cody of Lovefab, just to name a few.

 

Bump with a few pictures added.

 

Any idea on how many miles that tranny could have? And no grinds whats so ever? Let me know, pretty interested.

 

BUY THIS **** I have seen this car in action this setup is unbelievable cool *** cat products are outstanding.

 

Sent pm on injectors.

 

Sent PM

 

sent email!!

 

pm sent

 

I bought the tranny with a "supposed" 38,xxx miles on it. Since then I put almost another 9k on it. I had the Quaife installed by a friend who is a tech at Honda dealership and he checked all the gears and synchros.

 

 

BTW, all these parts are for my G35 6MT fund.

 

David is a good guy to deal with! Definately not a scammer. I have bought parts from him, and everything is EXACTLY how he described.

 

Updated with new pictures!

 

IMed you.

 

Replied.

Back up!

 

 

Here's the dyno this setup made for me:

http://www.imagestation.com/pi...a.jpg

 

Man o man, 411whp was fun.

 

bump for dave great guy and I cant wait to put that tranny to good use

 

Thanks!

 

Bump for an awesome seller and my best friend
ps. YOU FORGOT TO MENTION WHAT PSI THAT DYNO WAS AT

 

8 new pics up.