I have a ported polished head ported intake manifold cams, underdrivepullys and now i need to get a header for my h23, problem is only DC and Pacestter are the only two companys i can find, so does anyone know of any more makers and if not which one would you go with considering they both suck

 

they both suck, DC sports sucks a little less

 

ive gotta kamikaze header on my car......no complaints so far.

 

there was talk about fabricating an smsp version header for the h23
that's a longshot though, maybe if enough people would through in
on a group buy it could happen, other than that, your pretty much
stuck with dc or kamakize

 

ive seen a dyno showing an h23 with ebay intake gaining 7 whp with a dc header...apparently our headers are pretty restrictive from the factory

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">there was talk about fabricating an smsp version header for the h23
that's a longshot though, maybe if enough people would through in
on a group buy it could happen, other than that, your pretty much
stuck with dc or kamakize</TD></TR></TABLE>

HyTech makes a header for the H23, Jeff652 has one on his car...made some pretty awesome power before the engine let go.

Austin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin &raquo;</TD></TR><TR><TD CLASS="quote">

HyTech makes a header for the H23, Jeff652 has one on his car...made some pretty awesome power before the engine let go.

Austin</TD></TR></TABLE>

no way, do you have any pics of it?
have dyno'd it?

 

where can u get the hytech from i went to the site but no ordering or price info

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">

no way, do you have any pics of it?
have dyno'd it?</TD></TR></TABLE>

Here's the pic that I could find, I do not have the dyno plots.

The collector was produced this way as specified by the customer, it normally uses the standard Honda ball and socket style connection at the connector.



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybridumbidiots &raquo;</TD></TR><TR><TD CLASS="quote">

where can u get the hytech from i went to the site but no ordering or price info</TD></TR></TABLE>

There are two ways to get in touch with HyTech...

e-mail - hitechexhst@earthlink.net
phone - 949-581-2181

Austin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin &raquo;</TD></TR><TR><TD CLASS="quote">

Here's the pic that I could find, I do not have the dyno plots.

The collector was produced this way as specified by the customer, it normally uses the standard Honda ball and socket style connection at the connector.



There are two ways to get in touch with HyTech...

e-mail - hitechexhst@earthlink.net
phone - 949-581-2181

Austin</TD></TR></TABLE>

Ok, i believe you, but i still wanna see that mug on an h23 lude

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">

Ok, i believe you, but i still wanna see that mug on an h23 lude </TD></TR></TABLE>

So it's in a EG with a Fluidyne radiator...






Found a couple of pics...I believe that this is in a Prelude:

 

Ok...that would be an H22, not an H23....nice try, though....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_56 &raquo;</TD></TR><TR><TD CLASS="quote">Ok...that would be an H22, not an H23....nice try, though....</TD></TR></TABLE>

Sorry, that's the limit of the in car pics that I have.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry, that's the limit of the in car pics that I have.</TD></TR></TABLE>

i still have to call bs then

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">

i still have to call bs then </TD></TR></TABLE>

Sure...just because 1 person can't post a picture of something that they don't have you call BS...

If you have any questions call the manufacturer direct to speak with them on your concerns, they have more information on the fitting of their product, as they're all custom made.

Austin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin &raquo;</TD></TR><TR><TD CLASS="quote">

Sure...just because 1 person can't post a picture of something that they don't have you call BS...

If you have any questions call the manufacturer direct to speak with them on your concerns, they have more information on the fitting of their product, as they're all custom made.

Austin</TD></TR></TABLE>

sorry to come on you so hard
i'm from the show-me state