I'm happy to say that the car that PMUM dared to build is done and sitting in my garage. Those in the know have heard of this car...others are about to.

The short of it...397 rwhp, 13+lbs. of boost and a LOT of little goodies to keep it all together.

Penske adjustables, Brembos at all four corners and a little (ok a lot of) tweaking and fabrication by Erik at EMI Racing

Here's one of the dyno charts (the only one i remembered to get). This car drives like a stock car until you keep your foot planted on the LOUD pedal and then it...well...GOES! Kudo's to the guys at AUTOWAVE in Huntington Beach for finishing Paul's car with such dedication and professionalism...thanks guys. This in one niiiiiiiiice car.

brett

 

pics!

 

Penske adjustables?
damn those are only about 1600 a corner.

 

VERY NICE #'s. That car is going to be a monster!

 

nice smooth hp curve, but that dyno sheet pretty much blows
what were your tourque numbers, maybe its just me but im not seeing them
and post some pics of that boy

 

Nice What EMS is it running?

 

Very nice #'s.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">pics!</TD></TR></TABLE>


!!!!

man... those are some NICE #'s

 

its running aem ems

Harry Doyle:... wtf are you talking about... hell they would have made even more power if they would have reved it some more, it was still climbing when they let off at 8800 rpms

 

absolutely bad ***, any pics of this monster?

 

i wanna see pics too

 

Doh!

Sorry guys. I wasn't smart enough to check the "Email me all replies..." box.

Here are some pics. I don't have any of the engine bay yet. I'll try to get some of them tomorrow. Here are a few pics of the car taken by Doug at nsxfiles.

You can check out the little story about the S2000 vs. Ferrari too if you so choose.

http://www.nsxfiles.com/otc_2004_day5.htm

 

we know what the outside of an S2000 looks like. lets see some pics under the hood

 

Yea, engine bay and suspension shots please.

 

omg, WHERE ARE THE ENGINE PICS!?

 

I've been too busy driving it to look under the hood. I'll see what I can do....

 

I'm going to convince my pops to get a s2000 so I can do this to it

 

Are those rims photoshopped? They look weird.

Nice numbers though man!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm91integ &raquo;</TD></TR><TR><TD CLASS="quote">Are those rims photoshopped? They look weird.

Nice numbers though man!</TD></TR></TABLE>

Nope...they look weird because they are covered with brake dust and so are the tires.

 

Here some of the internals on the PMUM S2000:

Darton cylinder sleeves
Arias pistons
Cunningham connecting rods

3 Stage Full Port and Polish Head (KG)
w/Rev Springs and Crower retainers

AEM "stand alone"
650cc RC injectors

Novi 1000 3" Pulley
Comptech Aftercooler

*stock crank
*stock oil pump
*stock valves

 

Any pics under the hood

 

As soon as I get off my **** and get out there (the garage is too far from the couch) to get pics I will. j/k

I'll try to do it later today.

 

nice car and setup

 

and stock looking too. Sure gonna surprise a few big boys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Keeper &raquo;</TD></TR><TR><TD CLASS="quote">
AEM "stand alone"
650cc RC injectors

</TD></TR></TABLE>

Could you possibly share this AEM Map you have? Got a very simliar setup that I will be tuning and this would really help me!!! Peretty please!!