i am putting a 94 b18b in my 92 cx. i have all the swap parts from an auto but i am bolting a 5speed tranny to the b18b. will i need to replace all 3 axles or just the midshaft? i think i have to change the tranny mount too. the top one... right??? lmk. thanks in advance

 

the axles should slide right in since its a b-series motor, if anything, you might need an intermediate shaft

 

i agree...the manual and auto axles are the same...also make sure u have the right tranny mounts both upper and front

 

The axles are not the same they are different. You need an intermediate shaft from a manual tranny integra and the axles for a manual tranny for the same year the intermidiate shaft. You can get axles at O'Reillys or an auto store. The intermediatshaft has to be found at a salvage or ebay. You could use the intermidiate out of a del sol. You need a swap kit from hasport or enjo to install the engine in the car.

 

go to a Honda Dealer they have the same part #....u dont need a swap kit for B series into a EG...u can use stock mounts