FS: DOHC ZC head, IM, Block, PM7 pistons
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 528
Likes: 0
From: Knoxville, TN, USA
FS: DOHC ZC head, IM, Block, PM7 pistons
After spinning a rod bearing in the ZC I've decided to build up the old a6. The head and intake manifold are fine. TPS etc are all good. No valve damage was done.
I'm asking 150 for the head, and 60 for the IM. Reasonable offers are accepted as well. Buyer pays for the shipping. I may also just part it out. Will work great as a core or project.
The block is still good. The walls are not marked. The Crank does need to be refinished. If someone local to Knoxville, TN wants to look at it, email me please. The pistons are fine, 3 of the rods are as well.
Email me at viperbag@yahoo.com for inquires. Here are some pics of the head.
http://hangout.no-ip.com/zc/index.htm
recap:
ZC head
ZC IM
ZC block
4 good pistons, 3 good rods.
I'm asking 150 for the head, and 60 for the IM. Reasonable offers are accepted as well. Buyer pays for the shipping. I may also just part it out. Will work great as a core or project.
The block is still good. The walls are not marked. The Crank does need to be refinished. If someone local to Knoxville, TN wants to look at it, email me please. The pistons are fine, 3 of the rods are as well.
Email me at viperbag@yahoo.com for inquires. Here are some pics of the head.
http://hangout.no-ip.com/zc/index.htm
recap:
ZC head
ZC IM
ZC block
4 good pistons, 3 good rods.
Thread
Thread Starter
Forum
Replies
Last Post
driftdas2000
For Sale
1
Jul 17, 2008 07:24 AM
