As you all know, I posted earlier about ordering a headertech header, I have since purchased a DTR SS 1.8/2.0 Ltr header from "nutzurchin" which should arrive this week. My Setup is as follows. LS/VTEC

Head:
Full Competition port job From Joe.A of "ALANIZ"
Full Skunk2 Valvetrain
Skunk2 Stg 2 Cams
Skunk2 Manifold
RC 310injectors
b&m fpr
Hondata Manifold Gasket
STR 70mm TB
DTR 1.8/2.0 SS Header

Block:
99 b18b1
JDM p30 pistons
ARP Rod Bolts
GSR Water/Oil Pumps

Civic SI s4c tranny
New ACT Clutch, HD Pressure Plate, Street/Strip Disc

Full MSD Ignition Setup, Cap,Coil,SCI box
Hondata s200 with 2step and full throttle shift

Should be around 12:1 Compression with p30 pistons and head milled .30thousandths

This will all be going into a 95vx eg hatch completely gutted, with only a seat and partial dash and will be my weekend racecar. What kind of HP do you think is possible with this setup tuned and 1/4miles that could be attained. -Paul


Modified by tnsxsear1 at 6:40 PM 4/26/2004

 

Heres the answer to all your questions

CLICK HERE!!

 

Any1 else with a more intelligent guess with similiar setups?

 

hows this for intellegent...

Locked and docked