Just as the title states, i've got a 93 hatch w/ aprx. 140k miles on the chassis and 0 miles on my rebuilt motor, only idled! I sold my turbo kit in hopes of doing a mild all-motor build but in getting married and just found out yesterday that my fiancee is pregnant..sooo..im forced to sell my toy! This is my baby! Ive put countless hours working on this car to get it ready for the new season BUT its got to go. My mods cosist of:
ENGINE:
B18c1 block, crank, rods and head
BRAND NEW JDM type r pistons, rings and wrist pins
BRAND NEW OEM Rod bearings
BRAND NEW OEM Main bearings
Type R flywheel (resufaced)
Pro Clutch STG 3 pressure plate and six puck sprung clutch
Homemade ITBS w/ gsxr 1000 itbs and some ebay velocity stacks
DC 4-1 header
Brand new OEM headgasket and head bolts
GSR radiator

INTERIOR:
Autometer OIL pressure gauge and boost/vaccum gauge(<---still installed from turbo kit so its going w/ the car)
Interior is in great condition except for a 1.5 in tear on the seat (in the pic) that cant be seen while sitting down.There is a GSR cluster installed which is also in the picture.

EXTERIOR:
ROTA Slip's in gunmetal 15x6 wrapped in Bridgestone 195/50/15's. The car could use a paint job but its not killing anyone like it is at the present moment(of course the paint is 11yrs old so take that into consideration). Car is lowered w/ ebay coilovers and gsr shocks on all four corners.

Car has a clean title and the VIN # will be provided to serious buyers ONLY! Have title in hand so its ready to go ASAP! Im looking to get around 6500obo for the car so hit me up w/ a pm!! NO LOWBALLERS!!!! YOU WILL NO BE REPLIED TO!! Ive got Reciepts for everything thats been purchased so dont be scared to ask! Im sure ive forgotten a few things BUT if i have ill include them later! Thanks for looking and pass this thread onto your friends! If you need references i can hand them over asap also.








Car has a clean title and the VIN # will be provided to serious buyers ONLY!

 

ttt

 

congratulations on the marriage and the soon to have kid man.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by totalmindblower &raquo;</TD></TR><TR><TD CLASS="quote">congratulations on the marriage and the soon to have kid man. </TD></TR></TABLE>

thanks bro!

 

where are you located? still for sale? how well do those tb work saw a site where they give you step by step instructions looks very sweet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bjorn156 &raquo;</TD></TR><TR><TD CLASS="quote">where are you located? still for sale? how well do those tb work saw a site where they give you step by step instructions looks very sweet</TD></TR></TABLE>

im in South carolina

 

Good luck to you. I'm getting married as well and my fiancee is pregnant too.. small world. lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 10seceg &raquo;</TD></TR><TR><TD CLASS="quote">






Car has a clean title and the VIN # will be provided to serious buyers ONLY!

</TD></TR></TABLE>

Take off the .thumb.jpg on the end of the images next time so they don't post so small.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Happyman &raquo;</TD></TR><TR><TD CLASS="quote">

Take off the .thumb.jpg on the end of the images next time so they don't post so small.</TD></TR></TABLE>

Thanks for tha tip

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mafiozo &raquo;</TD></TR><TR><TD CLASS="quote">Good luck to you. I'm getting married as well and my fiancee is pregnant too.. small world. lol </TD></TR></TABLE>

Yes it is

 

I'm Very interested in the car, but I do need to know if it is at all possible for you to work out some sort of arrangements because I'm in Illinois, and I would have to be coming ~1000 just to take a look at it. It might be too much of a nuisance for you and if it is, I understand. One question however, what kind of tranny is in the car and how many miles on it and also what is the condition of the suspension and brakes? Also if you have any kind of dyno numbers, track times, was the car a daily driver or race only, etc I'd appreciate the info.

my email is spoolinfool4g63@yahoo.com, if you have any more pictures I would like to take a look at them also.

thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoolinfool4g63 &raquo;</TD></TR><TR><TD CLASS="quote">I'm Very interested in the car, but I do need to know if it is at all possible for you to work out some sort of arrangements because I'm in Illinois, and I would have to be coming ~1000 just to take a look at it. It might be too much of a nuisance for you and if it is, I understand. One question however, what kind of tranny is in the car and how many miles on it and also what is the condition of the suspension and brakes? Also if you have any kind of dyno numbers, track times, was the car a daily driver or race only, etc I'd appreciate the info.

my email is spoolinfool4g63@yahoo.com, if you have any more pictures I would like to take a look at them also.

thanks </TD></TR></TABLE>

pmed

 

sweet car man interested but have another on the blocks if falls through I will let you know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bjorn156 &raquo;</TD></TR><TR><TD CLASS="quote">sweet car man interested but have another on the blocks if falls through I will let you know</TD></TR></TABLE>

aight...cool deal...your 45min. north of me so that would work out great!@!!

 

great setup
bump for a good deal

 

do you still have the stock intake manafold?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Agent#ONE &raquo;</TD></TR><TR><TD CLASS="quote">great setup
bump for a good deal</TD></TR></TABLE>

thanks bro

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by usdmike &raquo;</TD></TR><TR><TD CLASS="quote">do you still have the stock intake manafold?
</TD></TR></TABLE>

nope..gotta skunk 2