Brand New 3" Mandrel bent exhaust - Prelude (4th gen)
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 3,968
Likes: 1
From: Austin, Tx, USA
Brand New 3" Mandrel bent exhaust - Prelude (4th gen)
obviously brand new, never used. I think this exhaust was originally made by Kteller8, but I'm not sure.
Its a 3" exhaust for a 4th gen Prelude. Perfect for turbo. It requires someone, preferably an exhaust shop, to weld it together. However, it comes with everything you need - even the flanges - so the cost of having it installed should be small.
All bends are mandrel bent. The muffler & pipes are stainless steel and the muffler is a mirror polished, straight-through magnaflow. Includes two 3" flanges, gasket, and hangars. It comes with enough straight pipe that you could either run it with or without the resonator. Both the resonator and the mufler are straight through with a perforated core.
two 3" flanges & a gasket.
polished magnaflow muffler w/ a 4" tip & 3" inlet
Its a 3" exhaust for a 4th gen Prelude. Perfect for turbo. It requires someone, preferably an exhaust shop, to weld it together. However, it comes with everything you need - even the flanges - so the cost of having it installed should be small.
All bends are mandrel bent. The muffler & pipes are stainless steel and the muffler is a mirror polished, straight-through magnaflow. Includes two 3" flanges, gasket, and hangars. It comes with enough straight pipe that you could either run it with or without the resonator. Both the resonator and the mufler are straight through with a perforated core.
two 3" flanges & a gasket.
polished magnaflow muffler w/ a 4" tip & 3" inlet
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
