FS: Built 99 B18B w/GSR quaife tranny almost complete swap+hondata 3b & extras
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jun 2002
Posts: 3,279
Likes: 1
From: St.Paul, MN
FS: Built 99 B18B w/GSR quaife tranny almost complete swap+hondata 3b & extras
okay guys/girls, i've finally decide to sell my motor/tranny setup due to theft and money issues. if you haven't heard, my baby was stolen right in front of my house not too long ago and the damn thieves took all the little gadgets/rims/extrior that they could and left my car to rust on the side of a empty highway. anyway, i'm trying to sell almost a complete swap. here's what you get:
motor, tranny, hondata 3B SOLD
99 B18B motor:
STR block guard welded 1/2" from deck(prevents cooling issues), mild port and polish(stage 3), Ross 8.6:1 pistons (81.5mm), Eagle Rods, ARP head/rod bolts, ACL main/rod bearings. (Oil pan drilled for oil return line, compression checked out at 180 all the way across, tapped oil line for turbo as well but can remove it).
96 GSR tranny:
New shims, Quaife LSD
(installed by previous owner, i love this tranny!!)
other stuff you get are the Intake manifold, TB, motor mounts, axles, shift linkage, throttle cable.
stuff you will need are ecu, distributor, exhaust manifold.
for this whole setup all i'm asking is $3500-$3000. i need someone to get it off my hands before the weekend, and i would also prefer a local buyer although i am willing to ship at buyer's expense. i will get pictures up tomorrow.
i also have a hondata 3B on an LS ecu that maybe forsale as well. it's programmed for a 3bar map on 550cc injectors at 17psi(ok to boost below 17psi).
also have a blitz dual-sbc electronic boost controller that's practically brand new except it needs the silenoid because that was ripped off by those dumbass thieves. that should cost too much, maybe $25-$50 from Blitz-usa. also have a Greddy 52mm EGT guage with all wiring and probe that i'll let go for $75 obo. there are some other stuff too but i'm not sure i'm gonna sell them yet(equal length manifold, turbonetics t3/t04e turbo).
oh yeah Walbro 255lph intank fp $60 shipped
Modified by shermanyang at 6:25 AM 4/13/2004
Modified by shermanyang at 3:07 AM 4/14/2004
Modified by shermanyang at 3:07 AM 4/14/2004
motor, tranny, hondata 3B SOLD
99 B18B motor:
STR block guard welded 1/2" from deck(prevents cooling issues), mild port and polish(stage 3), Ross 8.6:1 pistons (81.5mm), Eagle Rods, ARP head/rod bolts, ACL main/rod bearings. (Oil pan drilled for oil return line, compression checked out at 180 all the way across, tapped oil line for turbo as well but can remove it).
96 GSR tranny:
New shims, Quaife LSD
(installed by previous owner, i love this tranny!!)
other stuff you get are the Intake manifold, TB, motor mounts, axles, shift linkage, throttle cable.
stuff you will need are ecu, distributor, exhaust manifold.
for this whole setup all i'm asking is $3500-$3000. i need someone to get it off my hands before the weekend, and i would also prefer a local buyer although i am willing to ship at buyer's expense. i will get pictures up tomorrow.
i also have a hondata 3B on an LS ecu that maybe forsale as well. it's programmed for a 3bar map on 550cc injectors at 17psi(ok to boost below 17psi).
also have a blitz dual-sbc electronic boost controller that's practically brand new except it needs the silenoid because that was ripped off by those dumbass thieves. that should cost too much, maybe $25-$50 from Blitz-usa. also have a Greddy 52mm EGT guage with all wiring and probe that i'll let go for $75 obo. there are some other stuff too but i'm not sure i'm gonna sell them yet(equal length manifold, turbonetics t3/t04e turbo).
oh yeah Walbro 255lph intank fp $60 shipped
Modified by shermanyang at 6:25 AM 4/13/2004
Modified by shermanyang at 3:07 AM 4/14/2004
Modified by shermanyang at 3:07 AM 4/14/2004
Thread
Thread Starter
Forum
Replies
Last Post
92Jspec
Northern California (Sales)
32
Jan 13, 2009 05:46 PM
shermanyang
For Sale
13
Apr 13, 2004 12:10 PM
