FS: 94 Civic SI turbo, New Motor, not installed..
I am debating on puting the car back together or just selling everything as is. the car is a 94 SI with 164,000 Miles on the body. As much as I love the car I am just at a point where I can't keep spending money on it(which I will if I keep it). As well as my roomate just decided he's moving out so my rent is going to be going up. Time restraints and not enough hours in the day have made it hard for me to get everything back together
Engine/Fuel/Controls:
d16z6 not put together, but I can install all internals prof.
engine is fully machined
new aries 9:1 pistons
new eagle rods
all new bearings and engine overhaul gasket set
crank has been done up as well
no head, but can get a stock head.(have old one, but machine shop said it's no good)
have stock injectors and almost new DSM 440 injectors (with resistor pack)
AFC installed already
boost, air/fuel, egt(already tapped) gauges
prothane motor mounts
Magnacore wires/ NGK plugs
Tanabe RM SS Exhaust
Suspension & Such:
Sprint Springs
Full Camber Kits
16x7 Rota Circuit 8's with almost new Dunlop FM901 tires
New installed front power slot rotors and axis pads
New uninstalled rear rotors and pads
Extras:
Full greddy turbo kit W/ Type-s BOV (FMIC already installed)
Has type-r rear seat(also comes with stock rear seat)
I am sure I'm missing a lot if you have any questions feel free to ask. The car was in a small front eng accident about a year ago, the only thing that needed to be replaced was the fender(paint matched) and Rad. support, which was professionally done. I am still using the same bumper that was in the accident, so it wasn't bad. Here are two pictures I just took.. yes the car is very dusty. I am looking to get $5000 for EVERYTHING.


Forgot to add it has a VIS carbon fiber hood and Duckbill, here is a picture before I pulled the engine

and one from the rear

Modified by CharmCity at 1:57 PM 4/12/2004
Engine/Fuel/Controls:
d16z6 not put together, but I can install all internals prof.
engine is fully machined
new aries 9:1 pistons
new eagle rods
all new bearings and engine overhaul gasket set
crank has been done up as well
no head, but can get a stock head.(have old one, but machine shop said it's no good)
have stock injectors and almost new DSM 440 injectors (with resistor pack)
AFC installed already
boost, air/fuel, egt(already tapped) gauges
prothane motor mounts
Magnacore wires/ NGK plugs
Tanabe RM SS Exhaust
Suspension & Such:
Sprint Springs
Full Camber Kits
16x7 Rota Circuit 8's with almost new Dunlop FM901 tires
New installed front power slot rotors and axis pads
New uninstalled rear rotors and pads
Extras:
Full greddy turbo kit W/ Type-s BOV (FMIC already installed)
Has type-r rear seat(also comes with stock rear seat)
I am sure I'm missing a lot if you have any questions feel free to ask. The car was in a small front eng accident about a year ago, the only thing that needed to be replaced was the fender(paint matched) and Rad. support, which was professionally done. I am still using the same bumper that was in the accident, so it wasn't bad. Here are two pictures I just took.. yes the car is very dusty. I am looking to get $5000 for EVERYTHING.


Forgot to add it has a VIS carbon fiber hood and Duckbill, here is a picture before I pulled the engine

and one from the rear

Modified by CharmCity at 1:57 PM 4/12/2004
Thread
Thread Starter
Forum
Replies
Last Post
booscivic
Vehicles for sale
79
Jan 1, 2007 07:15 AM
CharmCity
Vehicles for sale
28
Jul 2, 2004 07:22 AM




