hey, i need some help from the honda oem experts. Here is my brake upgrade project.

i got a set of 96 spec JDM itr 4x114 brake setup. I found out after inspecting them that they are exactly like the USDM integra RS setup. Note: the holes where the calipers bolt to the spindle are closer than the holes on the GSR, LS, and ITR spindle.

Therefore the 98 spec itr spindle cannot adapt ITR calipers.

I want bigger brakes in the front, so here is my formula. Let me know if it is possible.

I got a set of JDM itr spindles, I want to press the JDM 4x114 hub assembly into the ITR spindles. Use prelude 4x114 rotors /w ITR or 92-95 accord wagon calipers.

Is this possible!

Note: i heard that 92 - 95 prelude rotors are the same size as ITR, please verify!