First thing is my old IC. It's an audi core and the core measures: 14"long X 7.5" high X 3.5" wide. With endtanks, it's about 24" long.

Core is actually pretty good! No noticeable pressure drop. Also has mounting tabs.

I'm now looking for 120 bux shipped.





second thing is my old blitz BOV

It's the same blow off valve that is in the above pictures and it comes with the flange and the 2.5" piping that it is connected to. Only the one pipe though.

Here's a picture of what it looks like
found a pic. Looks exactly like this one!

I'm looking for the same. 120 bux shipped (you also get that upper pipe too!!)

Finally, I have a bunch of stuff lying around. Make an offer and we'll talk!!

First off, I have three different turbine housings.

1. A .48 garrett turbine housing. Pretty dirty but it's in good shape. No cracks or anything.
http://reggie.shacknet.nu/users/domi...%20.48%201.jpg

http://reggie.shacknet.nu/users/domi...%20.48%202.jpg

http://reggie.shacknet.nu/users/domi...%20.48%203.jpg

http://reggie.shacknet.nu/users/domi...%20.48%204.jpg

2. Second on the list is a garrett .63 housing. Again, it's a bit dirty, but it's in awsome shape and again, no cracks.
http://reggie.shacknet.nu/users/domi...%20.63%201.jpg

http://reggie.shacknet.nu/users/domi...%20.63%202.jpg

http://reggie.shacknet.nu/users/domi...%20.63%203.jpg

http://reggie.shacknet.nu/users/domi...%20.63%205.jpg

http://reggie.shacknet.nu/users/domi...%20.63%204.jpg

3. Next up I have a Precision turbine housing. This thing is mint! It looks like it hasn't even been used!! In immaculate condition. The size is unknown to me but it's bigger than the garrett .63 turbine and the stage three wheel from garrett is so small in the turbine. Looks like a stage 5 could fit in there nicely though.

http://reggie.shacknet.nu/users/domi...cision%201.jpg

http://reggie.shacknet.nu/users/domi...cision%203.jpg

http://reggie.shacknet.nu/users/domi...cision%204.jpg

http://reggie.shacknet.nu/users/domi...cision%205.jpg


Here's a comparisson of the .63 garrett housing and the precision. The turbine wheel is a stage 3.

http://reggie.shacknet.nu/users/domi...arrett%202.jpg

http://reggie.shacknet.nu/users/domi...cision%202.jpg

http://reggie.shacknet.nu/users/domi...%20.63%201.jpg

http://reggie.shacknet.nu/users/domi...0precision.jpg


Next up, I have a smaller T04 compressor. Now I don't know the exact specs but it's a bit smaller than most t04's that I've seen. The compressor is really dirty cuz I had an exhaust leak in my manifold but it's easily cleaned up. This compressor includes the housing, the back plate, all necessary bolts, thrust bearings and compressor wheel.

http://reggie.shacknet.nu/users/domi...%20t04%201.jpg

http://reggie.shacknet.nu/users/domi...%20t04%202.jpg

[url=http://reggie.shacknet.nu/users/domi//turbo%20stuff/compressor%20housing%20t04%203.jpg[/url]

http://reggie.shacknet.nu/users/domi...%20t04%204.jpg

And here's a comparisson with another t4 which is a .50 ar.
http://reggie.shacknet.nu/users/domi...usings%201.jpg

Next I have a center section from a t3, the wheel itself was ghetto clipped so you'll prolly want a new one, but the seal is still good. The ghetto clipping did enable it to spool later at around 3000-3500 with the .63 housing. This center section is oil and water cooled and is in excellent shape.
http://reggie.shacknet.nu/users/domi...ection%201.jpg

http://reggie.shacknet.nu/users/domi...ection%202.jpg

 

ttt

 

No reasonable offers refused. Let's go!!! hahaah

 

up for the night

 

Nobody needs a turbine housing?

 

Blow off valve is tentatively sold and possibly the IC.

As for the rest, just make an offer on any of the three housings, who knows, you might get it cheaper than you expected! haha

 

are you selling the manifold? what motor is it for how much do you want for it? what brand is it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d98clturbo &raquo;</TD></TR><TR><TD CLASS="quote">are you selling the manifold? what motor is it for how much do you want for it? what brand is it?</TD></TR></TABLE>

No, sorry, no manifold for sale here, just the 3 turbine housings, the bov, IC and t4 compressor.

 

are you going to include ic piping along with the ic? if so 100shipped for the ic and piping

 

Intercooler is sold, still have bov, 3 exhaust housings and and t4 compressor housing and wheel.

 

im interested in your BOV .. how much for it shipped?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Oxygen &raquo;</TD></TR><TR><TD CLASS="quote">im interested in your BOV .. how much for it shipped?</TD></TR></TABLE>

Sorry man, the bov is tentatively sold pending payment.

 

.48 housing sold
t3 center section sold
t4 compressor housing and wheel sold
blitz bov sold
IC sold

still have:
precision turbine housing (in mint condition)
garrett .63 housing in excellent condition

Don't need either of these so make an offer!