valve lash specs for 00 itr cams in a 94 gsr
Joined: Oct 2003
Posts: 538
Likes: 1
From: SouthBay/SoCal
Re: valve lash specs for 00 itr cams in a 94 gsr (1fasEG)
The valve clearances for the stock gsr cams are...
Intake:0.15~0.19mm (0.006~0.007in)
Exhaust:0.17~0.21mm (0.007~0.008in)
In accordance with the Helms '94-'01 Acura Intgra Service Manual.
Im pretty sure they are close if not the same.
EDIT: These were the same tolerances I used when I installed my ctr cams in my b16a.
If you or anyone else reading this wants the "secret link" for the free helms dl pm me. well its not really secret.
Intake:0.15~0.19mm (0.006~0.007in)
Exhaust:0.17~0.21mm (0.007~0.008in)
In accordance with the Helms '94-'01 Acura Intgra Service Manual.
Im pretty sure they are close if not the same.
EDIT: These were the same tolerances I used when I installed my ctr cams in my b16a.
If you or anyone else reading this wants the "secret link" for the free helms dl pm me. well its not really secret.
Thread
Thread Starter
Forum
Replies
Last Post
4U2NV
All Motor / Naturally Aspirated
1
Dec 22, 2003 05:05 PM
