Listen I know this subject on JDM SRS stuff has been beaten to death but I did a search and found no results

Was woundering if anyone has found a way if they get stuck with a Civic Type R steering wheel instead of a DC2R wheel...of finding the right HUB and swaping it out I purchased a JDM SRS steering wheel the guy sent me pics and doubled checked with the pics I found on HT on which hub would be correct the pics he sent me were for a TYPE R according to the research done I received the steering wheel today and turns out its for a civic Type R

Please if anyone has any USEFUL info I would greatly appreciate it if not please no comments about the thread thanks

 

You got scammed so you should demand your money back and return if
he send you false pics.
Its too costly if it even can be done to retrofit CTR hub to ITR.
ITR hub should have key mark cut at 9 and 3 O'clock position on hub
and CTR have key mark cut at 12 and 6 O'clock position.

 

thats what I figured guy has awsome feedback too not a scammer but the pics he sent me were at the 9 and 3 oclock position thats what I was checking on anyways guess I will try to resell it shouldnt be a prob thanks for the info

 

doesn't even matter where the key marks are cut.. the size of the steering column shaft between integras and civics is different.

how do i know? because i have a JDM ITR non-SRS wheel and i tried it for the hell of it on my 97 Civic and it's not the key marks that make the difference.. its that the splines on the hub are much smaller than my steering column.

if you can confirm that NON-SRS and SRS hubs can be swapped.. i have a JDM ITR non-SRS hub to trade

 

I have a JDM non srs steering wheel on there now lol I tried to swap the hubs doesnt match or line up and your right about the splines they are larger then the integra thanks for the info guys

 

Honestly I wouldnt really mess with it since the JDM non srs steering wheel I have on there now I bought brand new from a shop but I have to have an airbag in my car to pass inspection so thought this would be a good opurtunity to get JDM srs wheel if all works out ill just sell my non srs JDM wheel

 

98itr???? has one that was modifyed to fit. I can't remember his whole s/n but hopefully he will see this and show you how it was done.
There is hope for you.

 

spoon 1... we can't find the pics of the hub modified but it had a factory (usdm) hub cut and welded in place of the CTR hub. sounds ghetto but it looked really good ( damn near stock ) and most of all it is solid and works.

 

*update** thanks for all the good info guys but I emailed the guy who sold it to me he agreed that the one he sent me was not the one int he pics and sent me an ITR hub I got it yesterday and installed it and took of the CTR hub good thing he was an honest person to deal with thanks once again everyone

 

yo if u still have the stock ctr hub
i have a jdm srs wheeel with from a ITR
and need the hun for my ek
u can email me at speedyek9@aol.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPOON 1 &raquo;</TD></TR><TR><TD CLASS="quote">*update** thanks for all the good info guys but I emailed the guy who sold it to me he agreed that the one he sent me was not the one int he pics and sent me an ITR hub I got it yesterday and installed it and took of the CTR hub good thing he was an honest person to deal with thanks once again everyone</TD></TR></TABLE>
Its good for once someone stand by their product!
Let see pics of your nice wheel installed!