REPLACEMENT RECOMENDATIONS
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,494
Likes: 0
From: Wrightsville, PA, U.S.A.
REPLACEMENT RECOMENDATIONS
OK Im gonna get new shocks & struts & a set of lowering springs.
What other parts should i replace while im doing this.
Should i put a dust sleeve on the new s&s ?
What other parts should i replace while im doing this.
Should i put a dust sleeve on the new s&s ?
Re: REPLACEMENT RECOMENDATIONS (RUBZERK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUBZERK »</TD></TR><TR><TD CLASS="quote">OK Im gonna get new shocks & struts</TD></TR></TABLE>
Just struts, kid........
Anyways, if your drop is gonna be lower than 1.25'', buy a camber kit. If you don't, your tire bill will eat you up.
If you still have $ to burn, you might as well replace the upper strut bushings with Energy Suspension bushings or the equivelent. Same for the rear.
If you STILL have $ to burn, see how much $ aftermarket sway bars are. They too will help with handling.
Just struts, kid........
Anyways, if your drop is gonna be lower than 1.25'', buy a camber kit. If you don't, your tire bill will eat you up.
If you still have $ to burn, you might as well replace the upper strut bushings with Energy Suspension bushings or the equivelent. Same for the rear.
If you STILL have $ to burn, see how much $ aftermarket sway bars are. They too will help with handling.
Honda-Tech Member
Joined: Jul 2002
Posts: 1,439
Likes: 0
From: Dirty South, USA
Re: REPLACEMENT RECOMENDATIONS (riceburner247)
[QUOTE=riceburner247]
Just struts, kid........
QUOTE]
actually it is shocks and struts.
I wouldn't worry about the dust sleeve, unless the OEM one fits during the install.
Just struts, kid........
QUOTE]
actually it is shocks and struts.
I wouldn't worry about the dust sleeve, unless the OEM one fits during the install.
Thread
Thread Starter
Forum
Replies
Last Post
DJHyperXK2004
Suspension & Brakes
14
Oct 22, 2005 08:31 AM