this is a Greddy Sohc Turbo Kit manifold and turbo redrilled to bolt onto a B Series engine - will give you great spool up and torque, here is what it includes:

- Greddy SOHC Turbo Manifold redrilled for B series
- Greddy td04-15g Turbocharger, no shaft play, great condition, with oil line
- Complete Piping to bolt onto car without intercooler and 2.5" downpipe and air filter
- Greddy Type S Bov with Flange already welded onto piping
- Missing Link
- Apexi Turbo Timer
- Vortech FMU

asking $950 for the entire setup - email me at ihaterice@hotmail.com with any questions, thanks

I bought this kit from Thrillhouse here on the board a couple of weeks ago - decided to go in another direction so I just need to get rid of it now.

 

if you start to part out lemme know!
530 680 2148 steve

 

Heh... bump for my old turbo kit. I milled the manifold out so it's perfectly port-matched with a B-series head and works great. Even welded the custom bov flange (so you can use other BOVs) and downpipe extension piece. Wastegate has also been modified for more boost also .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Newman &raquo;</TD></TR><TR><TD CLASS="quote">Heh... bump for my old turbo kit. I milled the manifold out so it's perfectly port-matched with a B-series head and works great. Even welded the custom bov flange (so you can use other BOVs) and downpipe extension piece. Wastegate has also been modified for more boost also .</TD></TR></TABLE>

how'd it pull on a bseries? i'm looknig for something small (under 10psi) for my b18b

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Newman &raquo;</TD></TR><TR><TD CLASS="quote">Heh... bump for my old turbo kit. I milled the manifold out so it's perfectly port-matched with a B-series head and works great. Even welded the custom bov flange (so you can use other BOVs) and downpipe extension piece. Wastegate has also been modified for more boost also .</TD></TR></TABLE>

haha, amazing how parts just get past around the community

 

 

good deal here

james

 

movin' on up...

 

...to the east side

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Infinity_Racer &raquo;</TD></TR><TR><TD CLASS="quote">

how'd it pull on a bseries? i'm looknig for something small (under 10psi) for my b18b</TD></TR></TABLE>

yeah.

still for sale?

 

still for sale lemme know

 

 

sold a while ago