Now *this* is a race exhaust
The tip is way toooooo small. How is the ground clearance? I don't know if I'd be comfortable with the tubing going under the gas tank.
This *not* my exhaust. [doesn't make sense to mod a car I'm trying to sell
]
This is for a race only teg so ground clearance isn't an issue. 2.5" stainless steel from beginning to end. I'd say it came out pretty well for homemade
yoshi - who will get to take this monster car for a spin s00n
]This is for a race only teg so ground clearance isn't an issue. 2.5" stainless steel from beginning to end. I'd say it came out pretty well for homemade
yoshi - who will get to take this monster car for a spin s00n
Trending Topics
Looks like you and your "buddy" are going to have fun tomorrow at the track...although driving to the track should noisy.
[Modified by 98LSTypeR, 6:39 PM 10/19/2001]
[Modified by 98LSTypeR, 6:39 PM 10/19/2001]
pretty sweet setup, Looks like it is an ES muffler. I think Iwill try something similar with my hatch but with a resonator or two added to quiet it down some. And as far as running under the gas tank wrap it in some header wrap then things won't be as hot under the tank.
you have to notice the header back design
no straight pipe, just exhaust!
if it can handle over 210 hp to whe wheels, i think this home made exhaust was a success!
no straight pipe, just exhaust!
if it can handle over 210 hp to whe wheels, i think this home made exhaust was a success!
Here's my race exhaust!
Adam - who has to figure out how to pass db tech next week at Lime Rock Park.
[Modified by AdamITR, 4:42 PM 10/24/2001]
Adam - who has to figure out how to pass db tech next week at Lime Rock Park.
[Modified by AdamITR, 4:42 PM 10/24/2001]
Adam - who has to figure out how to pass db tech next week at Lime Rock Park.
or rig up an electric motor from a fishing boat! HAHAHAH!!
Adam, how much was that nice hytech exhaust?
SMSP, this is how I wanted you to make me one... But with a different can, and the angle in the piping before the can, not the tip...
SMSP, this is how I wanted you to make me one... But with a different can, and the angle in the piping before the can, not the tip...
Black R
The canister can be purchased from http://www.coastfab.com. I ended up buying mine from John at Hytech though. Everything (canister & 18" section of S.S. piping) came to $250. I made my own b-pipe hangers & had them welded to the piping.
The canister can be purchased from http://www.coastfab.com. I ended up buying mine from John at Hytech though. Everything (canister & 18" section of S.S. piping) came to $250. I made my own b-pipe hangers & had them welded to the piping.
That is a copy of the exhaust I used on my car last year, except
i had an apex N1 can at the end. and yes it was INCREDIBLY LOUD.
but it flowed real nice
i had an apex N1 can at the end. and yes it was INCREDIBLY LOUD.
but it flowed real nice
yoshi - who suspects this will be LOUD




