FS: Integra Type R Intake Manifold
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
FS: Integra Type R Intake Manifold
From my old 2000 ITR. Slightly damaged..easy to fix.
<FONT SIZE="5">$125 shipped.</FONT>
e-mail justha3@pacbell.net or IM me. Faster response if you e-mail me.
<FONT SIZE="5">$125 shipped.</FONT>
e-mail justha3@pacbell.net or IM me. Faster response if you e-mail me.
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
Re: FS: Integra Type R Intake Manifold (skafia)
I dunno... I re-installed it after building the motor, and looked down and it was broke. I used Hondata IM gasket and swore I didnt over tighten it..
I had to buy a new one from dealer...
I had to buy a new one from dealer...
Joined: Dec 2002
Posts: 408
Likes: 0
From: Nagasaki, Ohio, USA
Re: FS: Integra Type R Intake Manifold (LSTEG96)
Um.
You could take this manifold to someone who welds aluminum, give them a 12 pack of miller lite and have a 250 dollar part for under 200.
I dont even know who the seller is either.
BUMP for a perfectly good EASILY FIXABLE part.
You could take this manifold to someone who welds aluminum, give them a 12 pack of miller lite and have a 250 dollar part for under 200.
I dont even know who the seller is either.
BUMP for a perfectly good EASILY FIXABLE part.
Trending Topics
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
Re: FS: Integra Type R Intake Manifold (colt45)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by colt45 »</TD></TR><TR><TD CLASS="quote">Um.
You could take this manifold to someone who welds aluminum, give them a 12 pack of miller lite and have a 250 dollar part for under 200.
I dont even know who the seller is either.
BUMP for a perfectly good EASILY FIXABLE part.</TD></TR></TABLE>
some real knowlege and helpfulness around here isnt as rare as it may seem.
You my firend, know what you are talking about.
You could take this manifold to someone who welds aluminum, give them a 12 pack of miller lite and have a 250 dollar part for under 200.
I dont even know who the seller is either.
BUMP for a perfectly good EASILY FIXABLE part.</TD></TR></TABLE>
some real knowlege and helpfulness around here isnt as rare as it may seem.
You my firend, know what you are talking about.
B*a*n*n*e*d
Joined: Aug 2002
Posts: 2,778
Likes: 0
From: NAR SPEC.com, So Cal, US
Re: FS: Integra Type R Intake Manifold (LSTEG96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSTEG96 »</TD></TR><TR><TD CLASS="quote">could u get it to seal right with a weld?? aluminum is a bitch to weld...</TD></TR></TABLE>
Stop digging a deeper hole for yourself.. lol.
Its fixable, and @ low cost..
Stop digging a deeper hole for yourself.. lol.
Its fixable, and @ low cost..
Joined: Dec 2002
Posts: 408
Likes: 0
From: Nagasaki, Ohio, USA
Re: FS: Integra Type R Intake Manifold (00 FBP ItR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00 FBP ItR »</TD></TR><TR><TD CLASS="quote">
Stop digging a deeper hole for yourself.. lol.
Its fixable, and @ low cost.. </TD></TR></TABLE>
Yes. As i said before
"You could take this manifold to someone who welds aluminum"
I dont weld it every day. And yea, its not that big of a bitch if you can weld and arent a fool. the important is to HAVE THE CORRECT equiptment. That makes it all easier
Stop digging a deeper hole for yourself.. lol.
Its fixable, and @ low cost..
</TD></TR></TABLE>Yes. As i said before
"You could take this manifold to someone who welds aluminum"
I dont weld it every day. And yea, its not that big of a bitch if you can weld and arent a fool. the important is to HAVE THE CORRECT equiptment. That makes it all easier
Honda-Tech Member
Joined: Apr 2002
Posts: 15,936
Likes: 0
From: King Tubbys studio, CA
Re: FS: Integra Type R Intake Manifold (Chris)
I had the same exact problem with an ITR manifold a few years ago, due to overtightening. Took it to a muscle car machine shop, and the guy welded it up for 10bucks. Still being used today on a friends car.
Joined: Dec 2002
Posts: 408
Likes: 0
From: Nagasaki, Ohio, USA
Re: FS: Integra Type R Intake Manifold (rodrez)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rodrez »</TD></TR><TR><TD CLASS="quote">I had the same exact problem with an ITR manifold a few years ago, due to overtightening. Took it to a muscle car machine shop, and the guy welded it up for 10bucks. Still being used today on a friends car. </TD></TR></TABLE>
That my friends is the correct answer.
As others would say, "told ya so".
Good luck on the sale. Good intake manifold, at a great price.
</TD></TR></TABLE>That my friends is the correct answer.
As others would say, "told ya so".
Good luck on the sale. Good intake manifold, at a great price.
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
Re: FS: Integra Type R Intake Manifold (colt45)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by colt45 »</TD></TR><TR><TD CLASS="quote">
Good luck on the sale. Good intake manifold, at a great price. </TD></TR></TABLE>
Thanks!
Good luck on the sale. Good intake manifold, at a great price.
</TD></TR></TABLE>Thanks!
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: (mchuang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mchuang »</TD></TR><TR><TD CLASS="quote">Not worth it</TD></TR></TABLE>
shut up. It would take a competent welder 5 minutes to tig weld that. You can have a perfect itr manifold for $170.
shut up. It would take a competent welder 5 minutes to tig weld that. You can have a perfect itr manifold for $170.
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
Re: (mchuang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mchuang »</TD></TR><TR><TD CLASS="quote">Not worth it</TD></TR></TABLE>
Im looking into fixing it first, then selling it for $170 shipped.
Im looking into fixing it first, then selling it for $170 shipped.
Joined: Jan 2004
Posts: 648
Likes: 0
From: Asheville, NC
Re: (Chris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris »</TD></TR><TR><TD CLASS="quote">
Im looking into fixing it first, then selling it for $170 shipped.
</TD></TR></TABLE>
yeah so you could buy a manifold you have to repair for $170 or you could buy it from the dealership for about that with an wholesale account....??? just a thought....
would be cool to weld up but you may want to ask a lil less for it..
Im looking into fixing it first, then selling it for $170 shipped.
</TD></TR></TABLE>yeah so you could buy a manifold you have to repair for $170 or you could buy it from the dealership for about that with an wholesale account....??? just a thought....
would be cool to weld up but you may want to ask a lil less for it..
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: (Em0ne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Em0ne »</TD></TR><TR><TD CLASS="quote">
yeah so you could buy a manifold you have to repair for $170 or you could buy it from the dealership for about that with an wholesale account....??? just a thought....
would be cool to weld up but you may want to ask a lil less for it..</TD></TR></TABLE>
why? it lists for $300. With a discount, its $240. I don't know a single person who gets wholesale at acura. So, with repairs, its still $70 less than the cheapest me or anyone I know can get it for new.
yeah so you could buy a manifold you have to repair for $170 or you could buy it from the dealership for about that with an wholesale account....??? just a thought....
would be cool to weld up but you may want to ask a lil less for it..</TD></TR></TABLE>
why? it lists for $300. With a discount, its $240. I don't know a single person who gets wholesale at acura. So, with repairs, its still $70 less than the cheapest me or anyone I know can get it for new.
Joined: Dec 2002
Posts: 408
Likes: 0
From: Nagasaki, Ohio, USA
Re: (743)
Is it coincidental that the majority saying its NOT worth it has under 50 posts?
Put it into a box, insure it, and ship it to a friend. open it all "wtf, what did you do" to the ups man. Boom, free manifold.
haha
Put it into a box, insure it, and ship it to a friend. open it all "wtf, what did you do" to the ups man. Boom, free manifold.
haha
Thread Starter
Member
Joined: Feb 2001
Posts: 6,131
Likes: 0
From: Santa Rosa
Re: (colt45)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by colt45 »</TD></TR><TR><TD CLASS="quote">LOL.
I was simply goofing Chris.
ill continue the bumps tho bro.</TD></TR></TABLE>
np heh...
I was simply goofing Chris.
ill continue the bumps tho bro.</TD></TR></TABLE>
np heh...
