how do the stock speakers come out without damage?

 

there are clips that hold it into the door, just push them down with a flathead screwdriver. It took me a while to figure out out too.

 

heh, o well...i just cut out the stock speakers from the rings with a pocket knife, then cut the plastic out with wire cutters and beat it out with a hammer...then installed aftermarket 6 1/2s on the stock rings

 

if your still working on your stereo system there are a few helpful write-ups that help u along @ http://www.clubrsx.com

 

I put in some cheap *** planet audios for now, but will upgrade sometime to either focal, or image dynamics