Acura Integra All Integra Except ITR

After motor install...

Thread Tools
 
Search this Thread
 
Old Mar 3, 2004 | 07:34 AM
  #1  
xSCTYGx's Avatar
Thread Starter
 
Joined: Jun 2003
Posts: 567
Likes: 0
From: Richmond, Va
Default After motor install...

Just installed it last night and the night before...i have some sort of vaccum leak i know because i have that bouncing idle...thatll be an easy fix. But the thing is, there is something wrong with my headlights. My passenger side headlight is much "dimmer" than the drivers side..and when i put my turn signal on, the whole headlight blinks...now we did not do anything with the headlight, but i did install an alarm...Reason i posted in this forum was that i unplugged the alarm and it still does the same thing...Ive done a couple searches one on "headlight problem" and "headlights" but i got a lot of for sale adds and the headlight problem came up with only 2 results...anybody have any idea how to fix this???
Reply
Old Mar 3, 2004 | 08:11 AM
  #2  
Devlins 91LS's Avatar
 
Joined: Dec 2003
Posts: 744
Likes: 0
From: SDSU, CA, USA
Default Re: After motor install... (2Gen91Teg)

Alright, well i stopped reading that monsterous paragraph right after the bouncing idle part.


thats the IACV, take it off, clean it, put it back. Problem solved.
Reply
Old Mar 3, 2004 | 10:07 AM
  #3  
xSCTYGx's Avatar
Thread Starter
 
Joined: Jun 2003
Posts: 567
Likes: 0
From: Richmond, Va
Default Re: After motor install... (Devlins 91LS)

actually its brand new..sorry for the long paragraph, just wanted to give yall enough info..oh and i have a 91 teg and just dropped a b18b motor in it...had to keep my old IM, dizzy, and exhaust mani to stay at 0bd0 instead of obd1..yall have any ideas?
Reply
Old Mar 3, 2004 | 12:59 PM
  #4  
ATS_Antone's Avatar
Junior Member
 
Joined: Jul 2002
Posts: 961
Likes: 0
From: ATS Garage, GA
Default Re: After motor install... (2Gen91Teg)

how's your battery voltage?
Reply
Old Mar 3, 2004 | 01:05 PM
  #5  
florduhdude's Avatar
 
Joined: Sep 2003
Posts: 130
Likes: 0
From: Pensacola, FL, USA
Default Re: After motor install... (antone)

adjust your idle, it sounds like the idle screw is too open. dunno on the other one, i'd say it's something with the alarm install because the factory wiring for the headlights and turn signal would be hard to cross by accident.
Reply
Old Mar 3, 2004 | 03:49 PM
  #6  
DK4200's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 601
Likes: 0
From: Scotia, NY, USA
Default Re: After motor install... (florduhdude)

could be a bad ground...

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PinoyDelS0l
Honda Prelude
1
Oct 1, 2011 01:02 PM
04TYPEsaggin
Acura RSX DC5 & Honda Civic EP3
1
May 12, 2008 04:11 PM
Will_H
Acura Integra
1
Sep 8, 2007 05:19 AM
locomex4life17
Honda CRX / EF Civic (1988 - 1991)
2
Jan 19, 2005 07:37 PM
SH LUDE
Honda Prelude
3
Oct 21, 2003 06:55 AM




All times are GMT -8. The time now is 07:09 AM.