FS: Rev Hard Stage 2C Turbo Kit for 94-01 Integra
Im guaging the interest in my turbo kit. Ive decided to go full out race and this kit is no longer needed. It includes:
Precision T3/T4 Turbo E Housing .60 A/R 57 Trim Compressor/.48 A/R Turbine
Spearco Intercooler
Rev Hard Cast Manifold
Tial 38mm Wastegate w/elbow(.7 Bar Spring)
2.5" Downpipe
All Piping and Hose Techniques Couplings(The Charge pipe will not be included)
It will come with everything you need to bolt this kit up minus the oil feed/return lines and charge pipe and BOV. Everything has about 3000 miles on it. I will also throw in a Vortech 8:1 FMU.
This kit will fit on any B-series engine. The downpipe and intercooler piping was setup on my 98 GSR. I should have pictures up by this weekend at the lastest.
Im looking to get around 2K plus shipping for this. I will not accept trades and accept paypal or money order. But prefer paypal.
Thanks Sal.
Precision T3/T4 Turbo E Housing .60 A/R 57 Trim Compressor/.48 A/R Turbine
Spearco Intercooler
Rev Hard Cast Manifold
Tial 38mm Wastegate w/elbow(.7 Bar Spring)
2.5" Downpipe
All Piping and Hose Techniques Couplings(The Charge pipe will not be included)
It will come with everything you need to bolt this kit up minus the oil feed/return lines and charge pipe and BOV. Everything has about 3000 miles on it. I will also throw in a Vortech 8:1 FMU.
This kit will fit on any B-series engine. The downpipe and intercooler piping was setup on my 98 GSR. I should have pictures up by this weekend at the lastest.
Im looking to get around 2K plus shipping for this. I will not accept trades and accept paypal or money order. But prefer paypal.
Thanks Sal.
i actually just used a 3" plumber fitting with a Filter. I should have pics of everthing this weekend. I forgot but ill include the filter in the kit. If you want.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboLSVtecTeg »</TD></TR><TR><TD CLASS="quote">Im guaging the interest in my turbo kit. Ive decided to go full out race and this kit is no longer needed. It includes:
Precision T3/T4 Turbo E Housing .60 A/R 57 Trim Compressor/.48 A/R Turbine
Spearco Intercooler
Rev Hard Cast Manifold
Tial 38mm Wastegate w/elbow(.7 Bar Spring)
2.5" Downpipe
All Piping and Hose Techniques Couplings(The Charge pipe will not be included)
It will come with everything you need to bolt this kit up minus the oil feed/return lines and charge pipe and BOV. Everything has about 3000 miles on it. I will also throw in a Vortech 8:1 FMU.
This kit will fit on any B-series engine. The downpipe and intercooler piping was setup on my 98 GSR. I should have pictures up by this weekend at the lastest.
Im looking to get around 2K plus shipping for this. I will not accept trades and accept paypal or money order. But prefer paypal.
Thanks Sal.</TD></TR></TABLE>
2k for an incomplete turbo kit?? you still need a charge pipe and bov, which runs about 300-375 and THEN the oil return and feed lines..........
Precision T3/T4 Turbo E Housing .60 A/R 57 Trim Compressor/.48 A/R Turbine
Spearco Intercooler
Rev Hard Cast Manifold
Tial 38mm Wastegate w/elbow(.7 Bar Spring)
2.5" Downpipe
All Piping and Hose Techniques Couplings(The Charge pipe will not be included)
It will come with everything you need to bolt this kit up minus the oil feed/return lines and charge pipe and BOV. Everything has about 3000 miles on it. I will also throw in a Vortech 8:1 FMU.
This kit will fit on any B-series engine. The downpipe and intercooler piping was setup on my 98 GSR. I should have pictures up by this weekend at the lastest.
Im looking to get around 2K plus shipping for this. I will not accept trades and accept paypal or money order. But prefer paypal.
Thanks Sal.</TD></TR></TABLE>
2k for an incomplete turbo kit?? you still need a charge pipe and bov, which runs about 300-375 and THEN the oil return and feed lines..........
Yes but the kit comes with a Tial 38mm Wastegate which is an upgrade from the Deltagate that the kits come with. It comes with Hose Techniques Silicone Couplings, which aint cheap; and the downpipe has already had the extension and flange welded on.
This kit is now ready to just bolt right up. All the fab work has been done with the downpipe and everything is in brand new condition.
If you think the price is too high. Them dont even bother posting.
This kit is now ready to just bolt right up. All the fab work has been done with the downpipe and everything is in brand new condition.
If you think the price is too high. Them dont even bother posting.
Thread
Thread Starter
Forum
Replies
Last Post
rizzoTK
Classifieds: Forced Induction
18
Feb 17, 2006 09:11 PM
a1320addict
Classifieds: Forced Induction
37
Oct 12, 2005 03:47 PM
a1320addict
Classifieds: Forced Induction
15
Oct 10, 2005 02:21 PM
BlackSi325
Classifieds: Forced Induction
13
Aug 6, 2004 02:35 PM
TurboLSVtecTeg
Classifieds: Forced Induction
3
Apr 7, 2004 11:28 PM




