I've done a b16a swap in my 90 crx. Does anyone have a site or picture of the pr3 ecu of the polls, so i can see where the vtec wires hook up, I have Three wires, a red wire, a yellow/black wire, and a black wire. Now on the Block side the vtec has two wires, a Red wire, And a Yellow wire, do i put the red with red, and the yellow/black with yellow, and the black to ground?, also on the ecu side i need to know where the yellow/black wire hooks in the ecu. Information on this would be really helpful.

 

Here are some good B-16 links:
Do yourself a favor and read member "Camshafts" input on wiring the 02 sensors:
https://honda-tech.com/zerothread?id=404493&page=1
and also
https://honda-tech.com/zerothread?id=404493&page=2 for more info..


Good wiring info at slo-pokes and B16a.com
ryan's

phat's

TJ's

Slo-pokes

B16a.com

There is also some good info at hasport





Modified by 88DXCRX at 2:34 PM 2/22/2004