*fishing* 95 Integra 2 liter fully built lsvtec w/turbo kit San Diego
Changing priorities from the car to finishing my education
I have a black 95 RS Integra and the motor was just finished, in the break in stage as we speak. It's black with white vinyl interior and very clean on 17's. Basically I'll give you a run down of the car and wondering what I should sell it for. The motor is fully built intended for turbo, and included is a custom 60-1 turbo kit I bought from Mike Laskey last year that hasn't made it's way to the car yet. Thanks for ur suggestions...PJ
Sleeved and bored to 84mm
JE 9:1 Pistons 84mm
Crower Connecting Rods *ARP Rod Bolts
ARP Head Bolts
B16 Head *Port and Polished
GSR Cams
JG Victor X Intake Manifold
STR Throttle Body 70mm
AEM Fuel Rail
AEM Fuel Pressure Regulator *liquid fp guage also
Stock Injectors *720cc Injectors Included
GSR Tranny
Polyurethane motor mount inserts
ACT 6 Puck Clutch
Apexi V-AFC
Walbro 255lph Fuel Pump
Hondata 2b
60-1 Turbo *BRAND NEW
HKS BOV *NEW
Tial Wastegate 35mm
Greddy Profec-B Boost Controller
Front Mount Intercooler 22x10x3 core with endtanks *guessing but I'll measure
All necessary Piping, connectors, and 3 Inch downpipe
There's about 65k miles on the chassis. This car has a brand spanking new motor and all aftermarket parts have seen less than 200 miles on them. The turbo kit just needs to go on and the hondata tuned and you're all set. I'm contemplating whether or not I want to finish this project or not because of school. Please let me know what you think I should ask for it...thanks
I have a black 95 RS Integra and the motor was just finished, in the break in stage as we speak. It's black with white vinyl interior and very clean on 17's. Basically I'll give you a run down of the car and wondering what I should sell it for. The motor is fully built intended for turbo, and included is a custom 60-1 turbo kit I bought from Mike Laskey last year that hasn't made it's way to the car yet. Thanks for ur suggestions...PJSleeved and bored to 84mm
JE 9:1 Pistons 84mm
Crower Connecting Rods *ARP Rod Bolts
ARP Head Bolts
B16 Head *Port and Polished
GSR Cams
JG Victor X Intake Manifold
STR Throttle Body 70mm
AEM Fuel Rail
AEM Fuel Pressure Regulator *liquid fp guage also
Stock Injectors *720cc Injectors Included
GSR Tranny
Polyurethane motor mount inserts
ACT 6 Puck Clutch
Apexi V-AFC
Walbro 255lph Fuel Pump
Hondata 2b
60-1 Turbo *BRAND NEW
HKS BOV *NEW
Tial Wastegate 35mm
Greddy Profec-B Boost Controller
Front Mount Intercooler 22x10x3 core with endtanks *guessing but I'll measure
All necessary Piping, connectors, and 3 Inch downpipe
There's about 65k miles on the chassis. This car has a brand spanking new motor and all aftermarket parts have seen less than 200 miles on them. The turbo kit just needs to go on and the hondata tuned and you're all set. I'm contemplating whether or not I want to finish this project or not because of school. Please let me know what you think I should ask for it...thanks
Thread
Thread Starter
Forum
Replies
Last Post
HybridTeg
Vehicles for sale
12
Dec 13, 2004 10:32 AM
SIXTYdashONE
For Sale
11
Dec 24, 2002 10:12 AM
SIXTYdashONE
Forced Induction
33
Dec 19, 2002 07:17 PM



Price

