mounts
Joined: Sep 2002
Posts: 88
Likes: 0
From: vancouver, bc, CANADA Eh
Re: mounts (vtech 900MHz cordless!)
OEM will bolt in But it angles the engine a little differently. So youll need the JDM hood with a hump in it. Very cool..but very $$$$ to get your hands on unless you bring a clip in 
.
Good luck....you can find aftermarket mounts used for $200-300 easy....
.Good luck....you can find aftermarket mounts used for $200-300 easy....
No tears. Only dreams, now.
Joined: May 2003
Posts: 4,064
Likes: 1
From: Long Live, Unk., USA
Re: mounts (boarderdudeh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boarderdudeh »</TD></TR><TR><TD CLASS="quote">OEM will bolt in But it angles the engine a little differently. So youll need the JDM hood with a hump in it. Very cool..but very $$$$ to get your hands on unless you bring a clip in .
Good luck....you can find aftermarket mounts used for $200-300 easy....
</TD></TR></TABLE>
If you don't get an aftermarket kit, and you want to stay stock, you have to torch the old mounting points off, then re-weld them further back in your car too. Fun fun...
.Good luck....you can find aftermarket mounts used for $200-300 easy....
</TD></TR></TABLE>
If you don't get an aftermarket kit, and you want to stay stock, you have to torch the old mounting points off, then re-weld them further back in your car too. Fun fun...
My old title sucked.
Joined: Nov 2003
Posts: 5,568
Likes: 0
From: Out to lunch. WI
Re: mounts (Hybrid Hatchback)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid Hatchback »</TD></TR><TR><TD CLASS="quote">hasport mounts 
no clearance issues or anything, </TD></TR></TABLE>
o yea. and they are solid
no clearance issues or anything, </TD></TR></TABLE>
o yea. and they are solid
Trending Topics
Joined: Jan 2004
Posts: 364
Likes: 0
From: Whitby, ON, Canada
Re: mounts (UNDER PRESSURE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UNDER PRESSURE »</TD></TR><TR><TD CLASS="quote">Hasport has the best mounts </TD></TR></TABLE>
I beg to differ.
http://www.azracemachine.com/BilletDesc8891.htm
SWEET mounts. I ordered mine last Friday, AWESOME customer service from these guys. Just awesome. I'm going to post when I get them with pics and everything and from the install.
I don't know why anyone would pay the INSANE cost of Hasport mounts compared to this.
</TD></TR></TABLE>I beg to differ.
http://www.azracemachine.com/BilletDesc8891.htm
SWEET mounts. I ordered mine last Friday, AWESOME customer service from these guys. Just awesome. I'm going to post when I get them with pics and everything and from the install.
I don't know why anyone would pay the INSANE cost of Hasport mounts compared to this.
Skoobie no more...
Joined: Jun 2002
Posts: 5,832
Likes: 1
From: Va Beach
Re: (ITR981002)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR981002 »</TD></TR><TR><TD CLASS="quote">yea... hurry before some minds are changed and money is saved.</TD></TR></TABLE>
yeah because EVERYONE wants to save money.
you know there are people who want the hasport name.
yeah because EVERYONE wants to save money.
you know there are people who want the hasport name.
Re: (dgonzals)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dgonzals »</TD></TR><TR><TD CLASS="quote">u can use 90-93 teg mounts also...no all of them...</TD></TR></TABLE>
Yup and get some ES Motor mount inserts heard they make a difference. And save yourself some money.
Yup and get some ES Motor mount inserts heard they make a difference. And save yourself some money.
No tears. Only dreams, now.
Joined: May 2003
Posts: 4,064
Likes: 1
From: Long Live, Unk., USA
Re: (ITR981002)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR981002 »</TD></TR><TR><TD CLASS="quote">yea... hurry before some minds are changed and money is saved.</TD></TR></TABLE>
Ahh... here it goes.
<FONT SIZE="4">HASport IS THE BEST!!!!! </FONT>
hahaha.... Save money... crack your mounts. YAY!
loser
Ahh... here it goes.
<FONT SIZE="4">HASport IS THE BEST!!!!! </FONT>
hahaha.... Save money... crack your mounts. YAY!
loser
Joined: Jan 2004
Posts: 364
Likes: 0
From: Whitby, ON, Canada
Re: (VashTheStampede)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VashTheStampede »</TD></TR><TR><TD CLASS="quote">
Ahh... here it goes.
<FONT SIZE="4">HASport IS THE BEST!!!!! </FONT>
hahaha.... Save money... crack your mounts. YAY!
loser</TD></TR></TABLE>
Yeah, these mounts suck:
Oh wait no, they are amazing, and ALSO carry a LIFETIME WARRANTY. These aren't ENJO or Place Racing **** mounts.
Ahh... here it goes.
<FONT SIZE="4">HASport IS THE BEST!!!!! </FONT>
hahaha.... Save money... crack your mounts. YAY!
loser</TD></TR></TABLE>
Yeah, these mounts suck:
Oh wait no, they are amazing, and ALSO carry a LIFETIME WARRANTY. These aren't ENJO or Place Racing **** mounts.
Honda-Tech Member
Joined: Jun 2002
Posts: 1,385
Likes: 0
From: Toronto, Ontario, Canada
Re: (spun Vtec)
I'm ordering a set as we type 
but i was reading the installation:
Honda 88-91 Civic/CRX Billet Engine Mounts
Installation Instructions
Model MT8891P
--------------------------------------------------------------------------------
Safety Notice!!
Always use and follow proper safety procedures when working.
Never work under a vehicle that is not safely supported by Jack-stands!
Wear proper safety glasses and safety equipment.
Always use the proper tool for the job you are doing.
--------------------------------------------------------------------------------
Additional Parts Required (contact us for help):
90-91 Acura Integra Rear Mount Bracket
90-91 Acura Integra Modified Shift Linkage
90-91 Acura Integra Axles
^ do we really need those parts for a B16A1 swap?
but i was reading the installation:
Honda 88-91 Civic/CRX Billet Engine Mounts
Installation Instructions
Model MT8891P
--------------------------------------------------------------------------------
Safety Notice!!
Always use and follow proper safety procedures when working.
Never work under a vehicle that is not safely supported by Jack-stands!
Wear proper safety glasses and safety equipment.
Always use the proper tool for the job you are doing.
--------------------------------------------------------------------------------
Additional Parts Required (contact us for help):
90-91 Acura Integra Rear Mount Bracket
90-91 Acura Integra Modified Shift Linkage
90-91 Acura Integra Axles
^ do we really need those parts for a B16A1 swap?
Junior Member
Joined: Nov 2003
Posts: 635
Likes: 0
From: pa, us
Re: (spun Vtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spun Vtec »</TD></TR><TR><TD CLASS="quote">why does everything always turn into a **** slinging fest ? 
</TD></TR></TABLE>
because this is honda-tech and everyone is better than everyone else. everyone wants to prove someone else is wrong when really most of the **** thats argued on here is a matter of opinion.
hasport good mounts but way too expensive
azrace cheaper and i haven't heard anything bad about them.
HCP cheaper yet, i know a whole bunch of people in my area that run these and have no problems at all.
</TD></TR></TABLE>because this is honda-tech and everyone is better than everyone else. everyone wants to prove someone else is wrong when really most of the **** thats argued on here is a matter of opinion.
hasport
good mounts but way too expensiveazrace
cheaper and i haven't heard anything bad about them.HCP
cheaper yet, i know a whole bunch of people in my area that run these and have no problems at all.
Member
Joined: Oct 2001
Posts: 2,118
Likes: 0
From: Santa Cruz, CA
Re: (kim_2_da_chee)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kim_2_da_chee »</TD></TR><TR><TD CLASS="quote"> Additional Parts Required (contact us for help):
90-91 Acura Integra Rear Mount Bracket
90-91 Acura Integra Modified Shift Linkage
90-91 Acura Integra Axles
^ do we really need those parts for a B16A1 swap?
</TD></TR></TABLE>
I don't know about the Integra rear mount but you do need a shift linkage from an Integra (or you can cut and weld your stock one) and you need axles and a halfshaft from an Integra as well.
90-91 Acura Integra Rear Mount Bracket
90-91 Acura Integra Modified Shift Linkage
90-91 Acura Integra Axles
^ do we really need those parts for a B16A1 swap?
</TD></TR></TABLE>
I don't know about the Integra rear mount but you do need a shift linkage from an Integra (or you can cut and weld your stock one) and you need axles and a halfshaft from an Integra as well.
Honda-Tech Member
Joined: Aug 2002
Posts: 2,020
Likes: 0
From: The Town to the Sko.
Re: mounts (Jays91DXhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jays91DXhatch »</TD></TR><TR><TD CLASS="quote">
I beg to differ.
http://www.azracemachine.com/BilletDesc8891.htm
SWEET mounts. I ordered mine last Friday, AWESOME customer service from these guys. Just awesome. I'm going to post when I get them with pics and everything and from the install.
I don't know why anyone would pay the INSANE cost of Hasport mounts compared to this.</TD></TR></TABLE>
How can you comment on the quality of these mounts when you havent even put them in the car yet? you have no idea what position the motor will be in .. did you even know that differnt mounts put the motor in diffent places or did you not think about and just got whats cheapest. as the old saying goes "you get what you pay for". good luck though. jumping to conclusions Hasport proven quality
I beg to differ.
http://www.azracemachine.com/BilletDesc8891.htm
SWEET mounts. I ordered mine last Friday, AWESOME customer service from these guys. Just awesome. I'm going to post when I get them with pics and everything and from the install.
I don't know why anyone would pay the INSANE cost of Hasport mounts compared to this.</TD></TR></TABLE>
How can you comment on the quality of these mounts when you havent even put them in the car yet? you have no idea what position the motor will be in .. did you even know that differnt mounts put the motor in diffent places or did you not think about and just got whats cheapest. as the old saying goes "you get what you pay for". good luck though.
jumping to conclusions Hasport proven quality
Honda-Tech Member
Joined: Jun 2002
Posts: 1,385
Likes: 0
From: Toronto, Ontario, Canada
Re: (SoulSurfer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SoulSurfer »</TD></TR><TR><TD CLASS="quote">
I don't know about the Integra rear mount but you do need a shift linkage from an Integra (or you can cut and weld your stock one) and you need axles and a halfshaft from an Integra as well.</TD></TR></TABLE>
do you have a picture of this 'halfshaft'? im confused
I don't know about the Integra rear mount but you do need a shift linkage from an Integra (or you can cut and weld your stock one) and you need axles and a halfshaft from an Integra as well.</TD></TR></TABLE>
do you have a picture of this 'halfshaft'? im confused
