I've been looking at the Sparco Torino 2's and sat in them a couple times. i like them a lot but they a bit expensive. But i fiqure if i can have mint Si seats for 13 years with no tears or anything these seats will last a life time.

Anyways i'd like to see what they look like in a EF/CRX or Hatch. Actually any racing seat in a crx or hatch.

SO PLEASE POST YOUR AND OTHER PICS OF RACING SEATS IN HATCHS AND CRXS!!!

also if installation easy? Where did you order yor seats/rail from!!!!

thanks!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GreenMachineRex &raquo;</TD></TR><TR><TD CLASS="quote">I've been looking at the Sparco Torino 2's and sat in them a couple times.</TD></TR></TABLE>

I wouldn't consider the Torino 2 a "race seat." What type of racing are you planning to use this seat for? A non-fixed-back seat will not be legal for many types of racing. If you're planning to use these for autocross, be sure you check the weight. I know that the original Torinos were very heavy.

 

I agree, I would rather have the stockers over the porky Torinos.
Grab the Sparco EVO's now that is a good seat and the make different sizes for different people.

 

Here is my CRX with a Sparco Sprint seat-

 

 

I had a chance to pick up corbeaus like that for $300/set w/ rails. I blew it *idiot*

 

No thats not rust on the floorboard its GA clay

 

dude those kirkey's rock! I had one in my old crx for a while, god forbid you gotta take a road trip in that though...

 

I like them but a road trip...no....racing yay!

 

1. How much does a stock si seat weigh?
2. How much does a torino 2 weigh?
3. How much does a EVO weigh?

thanks! more pics! these seats will be used for daily driver/street racing/ Track/3 hour trips to Ocean City. Please help me in deciding the perfect seat for me.

Would i be pissed with non-adjustable/reclinable seats like the EVO?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GreenMachineRex &raquo;</TD></TR><TR><TD CLASS="quote">
Would i be pissed with non-adjustable/reclinable seats like the EVO? </TD></TR></TABLE>


I thought I would not like my non-reclineable..but its not that bad...

depends on how far you have to drive to the track..

I swapped the racing seat out for the stock one before an 8 hour trip..

 

i think im ditching the torino idea since they weigh ******* 37LBS!!!!!!!!!!!!!!!!!!

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FourthGenHatch &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

Could you take a pic of where you mounted your harness?

 

azroth I believe he has some good pics on his site in his sig.
http://www.fourthgenhatch.com

Torino=34.2lbs each
Evo=15lbs
Stock I believe was around 37
Big diff with the EVO

 

Tin can seats look crazzyy.. also looks uncomfortable..

 

the corbeau forza II will not work in a CRX without removing the center console

 

I have corbeau cr1's in my rex. I love em.



Yager-


Modified by ImportHatch at 12:36 AM 1/27/2004

 

my cobra seat



i replaced it with a tenzo since i was not racing anymore, then i replaced it with the stock seat. for long trips, fixed seats are super-uncomfortable, don't recomend, unless you buy extra cushion for your butt!!!!!!!!

 

im getting the sparco fighters. they got a lot of extra padding.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by travis &raquo;</TD></TR><TR><TD CLASS="quote">I wouldn't consider the Torino 2 a "race seat." What type of racing are you planning to use this seat for? A non-fixed-back seat will not be legal for many types of racing. If you're planning to use these for autocross, be sure you check the weight. I know that the original Torinos were very heavy.</TD></TR></TABLE>
So aftermarket seats are a must sometimes?

 

i'd like to see some pics of either sparco sprints or corbeau forza's. both are in my price range, i think. anybody know how much they cost with rails and everything? i'm thinking about just getting one for the driver and put in a stock si seat into my std hatch. lemme know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Red_Si &raquo;</TD></TR><TR><TD CLASS="quote">i'd like to see some pics of either sparco sprints or corbeau forza's. both are in my price range, i think. anybody know how much they cost with rails and everything? i'm thinking about just getting one for the driver and put in a stock si seat into my std hatch. lemme know</TD></TR></TABLE>

scroll up, corbeau forza's have been posted, forza II's will not work in a CRX without removing the center console, i found this out thru trial and error

 

if my fighters don't fit im def sending them back! haha

anyways. fourthgen hatchs seats were cerhap i think he told me...400+ thats madd cheap