drag gen 3 kit, jackson racing fuel pump, bm fpr, and rc 550ccs injectors? Can i daily drive with those installed in my car , the fuel pressure is at stock pressure for both vaccuum and non vaccuum situations, if i install the 550ccs will they be adding more fuel right away or can i drive with them everyday and not be riding too rich. My turbo kit is not back on my motor yet i am just piecing together some parts and installing them in the mean time, thanks

 

will run like ****, if it starts

 

you need some kind of fuel management.

 

so when should i install these? a couple min b4 i get it tuned? woulda tuning shop install them? I have a vafc2, i plan to use that to manage everything... basically what your saying is i should wait to install the injectors until i am ready for tuning?

 

yes wait. there is no way of controlling the injectors and how much it shouldl put out b/c u are using an fmu. all the fmu does is monitor the vac. and when it sense it need to send out more fuel, it does so.

 

so when i installthekit again i can put these into the system and it will run fine?

 

get hondata and you can run 550cc like its stock =P

 

ca i do that with a vafc2? properly tuned