"ITSTOCK is in the process of settling this deal, ill keep you posted"


Modified by idontcare at 1:31 AM 1/18/2004

 

Did you attempt to contact him at all after the delivery of the dizzy?

What's the difference between the DOHC ZC dizzy and Si dizzy?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by idontcare &raquo;</TD></TR><TR><TD CLASS="quote">what do yall think should be done about it.im ready to fight but he is in maine </TD></TR></TABLE>


Have you even TRIED to resolve this with him yet? Don't be so quick to throw a punch, son. Keep a cool head and try to deal with it like an adult.

 

http://www.geocities.com/civiczc/zcwire.html

It'l work fine with small modification. I stand by ITSTOCK, he's a great guy and if this distributor will not work then it must have been a simple case of misunderstanding (probably on his part about the use of the dizzy) but I think most people use an si distributor because ZC dizzy's are hard to find new.
I've done 2 complete transactions with him, one where he even fronted $250 before I paid him. He's definately a preferred seller.

And yeah, might want to im him or email him. He's on often and tries to make everyone happy that he sells to.

Or you can come up to Maine and freeze yer nutz off in our -16 degree weather.

 

For the DOHC ZC, it's either the DOHC ZC Distributor (Very Rare and most are junk) or the 89 Integra Distributor.


I'm Using the 89 Integra Distributor


He should have mentioned that it was an SI distributor instead of being a DOHC ZC dizzy.

 

the Si one doesn't work, i tryed every which way.. but they sit completely different, for one you can't get it to bolt up.. and 2 the timing is way different, the Si dizzy sit Up and down on the Si motor like this l the ZC one sits like this on the ZC motor \ so they wouldn't be firing at the right time. the correct one to use would be from a 89 integra, or the ZC.. so yes you are entitled to a full refund

 

its impossible to use a Si distributor for a zc...the closest thing you can use would be the DX distributor...you should have probalby contacted him before making a scene...he might have put the Si distributor in the box by mistake and leaving the zc/teg one on the counter...mistakes do happen...

*in no way am i taking sides with either, im just giving an opinion*

 

woah woah woah there buddy, dont ya think u should have contacted me before you made this thread? im a very helpful person as you should know, (tiggscrx and B2Finity to name a few people, can vouch for me being helpful) and i will do anything in my power to settle this. First off id like to say that YOU are the one who fucked up on the address, the first address you gave me you only wrote "Ray" and you didnt write your apartment number or whatever it is and they wouldnt deliver it to you, and the second time u gave me your full name, and again forgot to give me the apartment number,or trailor number, and they returned it again. i had to pay for shipping 3 times ($11) becuase you gave me a wrong address twice (i CAN read english) theres 33 bux out of my pocket right there. And in this whole process, i didnt appreciate the THREATENING emails you sent me either, considering i LOST $25 + on this deal.


Now, as far as the dist. A local kid that i know and have been friends with for about 3 years, had this distributor in his car, it was a 1988 CRX HF, with a JDM ZC engine swap. He wrecked his car, parted it out, i saw your thread on here needing a dist., so the helpful person that i am (ive been carless before and know how bad it sux bumming rides, i felt for you) i contacted my buddy and said i wanted his dizzy, i went over picked it up and paid him $50 for it and then paid the $11 to ship it to you (theres $6 i already lost) then i had to pay another $22 to ship it two more times after that. Now, i know this kid had the dist. on his ZC, unless he shafted me and gave me an si dist. when i went and picked it up (i highly doubt since ive done alot of business with this kid and we're like brothers.) Why do you think its an si distributor? Did it not work on your car? Why dont you contact me here on an instant message,or if you feel the need to be ignorant we can continue this on this post so that everyone can here our business. Lets get this settled!!!

Just FYI: coming out here and making a thread about how u think i scammed you and trying to make me look bad, was the second un-intelligent thing you've done during this deal, and pisses me off, i would have been even happier to settle this even faster through private (the first un-intelligent thing was not knowing how to write your name and address on a damn money order, and in an email!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITSTOCK &raquo;</TD></TR><TR><TD CLASS="quote">woah woah woah there buddy, dont ya think u should have contacted me before you made this thread? im a very helpful person as you should know, (tiggscrx can vouch for me being helpful) and i will do anything in my power to settle this. First off id like to say that YOU are the one who fucked up on the address, the first address you gave me you only wrote "Ray" and you didnt write your apartment number or whatever the **** it is and they wouldnt deliver it to you, and the second time u gave me your full name, and again forgot to give me the apartment number,or trailor number, and they returned it again. i had to pay for shipping 3 times ($11) becuase you gave me a wrong ******* address twice (i CAN read english) theres 33 bux out of my pocket right there. And in this whole process, i didnt appreciate the THREATENING emails you sent me either, considering i LOST $25 + on this deal.


Now, as far as the dist. A local kid that i know and have been friends with for about 3 years, had this distributor in his car, it was a 1988 CRX HF, with a JDM ZC engine swap. He wrecked his car, parted it out, i saw your thread on here needing a dist., so the helpful person that i am (ive been carless before and know how bad it sux bumming rides, i felt for you) i contacted my buddy and said i wanted his dizzy, i went over picked it up and paid him $50 for it and then paid the $11 to ship it to you (theres $6 i already lost) then i had to pay another $22 to ship it two more times after that. Now, i know this kid had the dist. on his ZC, unless he shafted me and gave me an si dist. when i went and picked it up (i highly doubt since ive done alot of business with this kid and we're like brothers.) Why do you think its an si distributor? Did it not work on your car? Why dont you contact me here on an instant message,or if you feel the need to be ignorant we can continue this on this post so that everyone can here our business. Lets get this settled!!!

Just FYI: coming out here and making a thread about how u think i scammed you and trying to make me look bad, was the second un-intelligent thing you've done during this deal, and pisses me off, i would have been even happier to settled this even faster through private (the first un-intelligent thing was not knowing how to write your name and address on a damn money order, and in an email!!!</TD></TR></TABLE>

bwhahaha...i dont understand that...i just sent a package to some guy...he wouldnt tell me his full name...he said either put his first name or his s/n...im like wtf...

but yes like i said earlier you should have contacted Itsstock before this...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by idontcare &raquo;</TD></TR><TR><TD CLASS="quote">im ready to fight but he is in maine </TD></TR></TABLE>

Comments like this will get you nowhere i life,you dont know how big i am, who i know, or what i carry for a gun, please act mature about this.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITSTOCK &raquo;</TD></TR><TR><TD CLASS="quote">woah woah woah there buddy, dont ya think u should have contacted me before you made this thread?

Just FYI: coming out here and making a thread about how u think i scammed you and trying to make me look bad, was the second un-intelligent thing you've done during this deal, and pisses me off, i would have been even happier to settled this even faster through private (the first un-intelligent thing was not knowing how to write your name and address on a damn money order, and in an email!!!</TD></TR></TABLE>

I gotta agree with ITSTOCK,this thread should just be LOCKED. Just IM the guy and settle this.Why try to bash on someone,and make a *** of your self.

 

its easy to tell the difference between the SI and the ZC, for one the plugs are different, the ZC has 1 square one round plug, where as the SI has 2 rounds.. then the ZC had a LONG *** leg on the bottom.. and the SI has short stubby 3 legs.. i'm not bashing u saying u didn't know.. but just FYI in case there is dispute.. but i agree about the threats thats childish

 

Could it be that he got a SOHC ZC dizzy?

In that case, it still is technically a ZC dizzy.

The threats were uncalled for, the calling out was uncalled for, and the overall childishness was uncalled for.

You did the WRONG thing by posting this instead of trying to contact ITSTOCk.

 

ITSTOCK....i did as u requested for u to handle this promptly. u read my email 2min after i sent it. ..................so whats happening.?need reply.

 

wow, if you sent him an email... HE IS GOING TO GET THE EMAIL. No need to remind him over and over... thats what the *email chime* is for.

 

You emailed me, but you never told me what you want to resolve this. Think of a reasonable solution and i'll work with you. But when you email me and just say "hey its Ray, email me back" that doesnt help me to much.