My actuator on the Greddy 18G is broken. Basically, the nipple part of the actuator is broken off so I cannot put the hosing on it. What would happen if I drove without an actuator? Will it stay at 4.5psi or will it just boost as high as it wants?

 

If you drive without the hose hooked to the actuator you will boost high. If you dont want to boost at all just unhook the actuator arm.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by genop &raquo;</TD></TR><TR><TD CLASS="quote">If you drive without the hose hooked to the actuator you will boost high. If you dont want to boost at all just unhook the actuator arm.</TD></TR></TABLE>

The best boost controller is the driver's right foot.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Maxime &raquo;</TD></TR><TR><TD CLASS="quote">

The best boost controller is the driver's right foot. </TD></TR></TABLE>

good luck! with a free flowing exhaust that bitch is going to spike to 14psi and beyond quicker than you can blink your eye.

i would find a way to get that nipple back on the actuator.

 

if u have a soldering gun, and are any good at soldering try repairing it.. i soldered mine it and it worked great so far

 

thats a good idea. i was going to suggest jbweld but that might be a better idea.