I was searching for an old post by a moron w/ a Prelude that kept askin how to make his prelude the ultimate cornering machine. I remember one of them mentioned a tool that let you do your own alignments, and it was fairly cheap.

Anyone got a link to the site w/ that tool?

 

http://www.racerpartswholesale.com/long19.htm

Longacre toe plates work well for finding toe settings.


youll need a partner tho.


Modified by Tyson at 10:11 PM 1/7/2004

 

https://honda-tech.com/zerothread?id=267237

This was a great thread.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyson &raquo;</TD></TR><TR><TD CLASS="quote">

youll need a partner tho.


Modified by Tyson at 10:11 PM 1/7/2004</TD></TR></TABLE>

where do I get one of those?

 

I made a set out of scrap plywood and made the slots on one really tight to keep the end of the tape measures from falling out. By carefully pulling them tight, I can run them without a helper. I ran a crossbrace to make a T shape to keep the wood from warping. They work OK and were free.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeyKrus &raquo;</TD></TR><TR><TD CLASS="quote">I was searching for an old post by a moron w/ a Prelude
</TD></TR></TABLE>

https://honda-tech.com/zerothread?id=122550

 

A cheap (read: not perfect, but ok) camber measuring device for those with adjustable camber.
http://www.harborfreight.com/c...34214