WTB: LS/VTEC items needed to finish project
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 292
Likes: 0
WTB: LS/VTEC items needed to finish project
LS/VTEC Parts Needed
1. Exhaust system: Cat, mandrel piping
(looking $250ish shipped)
2 Timing belt + Water pump GSR
(looking $50ish shipped) Autozone and some other place said $20 Gates Timing belt and $20 for Water pump
3. Bearings for main and rods pretty much the whole bearing set B18B1 (want ACL)
(looking $100ish shipped)
4. Trans axles LS without anti lock
(looking $100ish shipped) Autozone and Advanced auto quoted me this much for new. can anyone go lower?
5.GSR bridge with bolts
(looking $30ish shipped for GSR)
I'd like to hear any suggestions, leave a link with the item you found cheap
This is what I got
B16 head
B18A1 Block
Everything else I have.
Modified by freezerburnv2 at 9:42 PM 1/4/2004
1. Exhaust system: Cat, mandrel piping
(looking $250ish shipped)
2 Timing belt + Water pump GSR
(looking $50ish shipped) Autozone and some other place said $20 Gates Timing belt and $20 for Water pump
3. Bearings for main and rods pretty much the whole bearing set B18B1 (want ACL)
(looking $100ish shipped)
4. Trans axles LS without anti lock
(looking $100ish shipped) Autozone and Advanced auto quoted me this much for new. can anyone go lower?
5.GSR bridge with bolts
(looking $30ish shipped for GSR)
I'd like to hear any suggestions, leave a link with the item you found cheap
This is what I got
B16 head
B18A1 Block
Everything else I have.
Modified by freezerburnv2 at 9:42 PM 1/4/2004
Honda-Tech Member
Joined: Nov 2001
Posts: 536
Likes: 0
From: Planet Earth
Re: WTB: LS/VTEC items needed to finish project (freezerburnv2)
You'll also definitly need the Integra Type R oil pump for increased oil lubrication. We sell them for $119.98 brand new. Check it out on JDMGears.com. 
Honda-Tech Member
Joined: Sep 2001
Posts: 2,223
Likes: 0
From: naples, florida, usa
Re: WTB: LS/VTEC items needed to finish project (freezerburnv2)
If your looking for Bearings you might want to go straight to your local Acura dealer. You need to get the codes on the block and the crank.
Honda-Tech Member
Joined: Apr 2002
Posts: 1,768
Likes: 0
From: murfreesboro, tn, usa
Re: WTB: LS/VTEC items needed to finish project (freezerburnv2)
https://honda-tech.com/zerothread?id=721977
got a few things here
got a few things here
Trending Topics
Honda-Tech Member
Joined: May 2003
Posts: 2,696
Likes: 0
Re: WTB: LS/VTEC items needed to finish project (biggdogg)
got a tanobe super racing medalion will fit all integra 94-01
and 92-95 civic coups
also have a stock usdm itr header
im me and ill get you some pics it you want
and 92-95 civic coups
also have a stock usdm itr header
im me and ill get you some pics it you want
Moderator
Joined: May 2001
Posts: 12,232
Likes: 5
From: Browns Summit, NC, USA
Re: WTB: LS/VTEC items needed to finish project (freezerburnv2)
LS/VTEC Parts Needed
1. Exhaust system: Cat, mandrel piping
(looking $250ish shipped)
might happen
2 Timing belt + Water pump GSR
(looking $50ish shipped)
NOT GONNA HAPPEN....and you NEVER WANT TO PUT A USED TBELT on!! especially something that is finicky to begin with
3. Bearings for main and rods pretty much the whole bearing set B18B1 (want ACL)
(looking $100ish shipped)
try CAMP1320 or EARL
4. Trans axles LS without anti lock
(looking $80ish shipped)
ONCE AGAIN NOT GONNA HAPPEN!!!
5.GSR bridge with bolts
(looking $30ish shipped for GSR)
i'm assuming you mean BLOCK GIRDLE....again NOT GONNA HAPPEN....i have one but want 100 for it!
I'd like to hear any suggestions, leave a link with the item you found cheap
B16 head
B18A1 Block (i have one make offer)
1. Exhaust system: Cat, mandrel piping
(looking $250ish shipped)
might happen
2 Timing belt + Water pump GSR
(looking $50ish shipped)
NOT GONNA HAPPEN....and you NEVER WANT TO PUT A USED TBELT on!! especially something that is finicky to begin with
3. Bearings for main and rods pretty much the whole bearing set B18B1 (want ACL)
(looking $100ish shipped)
try CAMP1320 or EARL
4. Trans axles LS without anti lock
(looking $80ish shipped)
ONCE AGAIN NOT GONNA HAPPEN!!!
5.GSR bridge with bolts
(looking $30ish shipped for GSR)
i'm assuming you mean BLOCK GIRDLE....again NOT GONNA HAPPEN....i have one but want 100 for it!
I'd like to hear any suggestions, leave a link with the item you found cheap
B16 head
B18A1 Block (i have one make offer)
Thread
Thread Starter
Forum
Replies
Last Post
MiKeAhOwSkI
All Motor / Naturally Aspirated
2
Dec 30, 2004 04:02 AM
