NEED HELP ON MY AUDIO SYSTEM
Guys, i was broke and still broke. I have 2compvr kicker 12", 1200watt FormulaX amp, 800watt Formulax amp, MA audio components and 6x9 pioneers. I didn't know **** about audio system, so i bought it from an audio shop. When they finished installing them, they were fine. After about two months, when i turn my volume on..there is a low static noise. When the music is on, the music overlap the static so i couldn't hear it no more. I can only hear it the first few seconds of the songs when there's no music yet. Anybody knows what is the problem?
you bought it at a shop and had it installed there...simply go back and say "fix it" and don't take the car back until it is fixed. Don't let them sell you anything else either...
They have to stand by their product/work
They have to stand by their product/work
take it back to the shop if im to help you and you did not install it and you dont know **** about stereos then if I ask you where wires run and how its hooked up your going to say I dont know. So then no one can help you and you have to go back to the shop cause your S.O.L or buy a book and learn yourself.
hmm, that sounds interesting, have you gone over all of your wires and made sure all the connections were nice and clean and all the grounds are properly connected? also it could be ur amps too.
if that doesnt work, then go to radio shack or even to a car audio shop and ask them for noise filters. they do exactly what there titled to do. and if that doesnt work, then worst case, sell it all on ebay, and just start over from scratch. but study how they hooked it all up so you could get a good idea of what your going to do. but if ur not that confident in stereo's take it to a well known local car shop.
i have a ALPINE IVA-C801 and it had enough wires to wire up fort knox for there cameras. so i took it to circuit city and they installed it for me for like 70 bucks. so just go that rout if u have no idea what ur doin..
dont be mad at know knowin what ur doin cuz its simple to blow somethin or start a fire or even make **** not work or ur car not start.. so be careful my man!!!
good luck and **** u flamers.. he needs help not flames from u so called "PRO'S" that "KNOW IT ALL" and expect others to know too
if that doesnt work, then go to radio shack or even to a car audio shop and ask them for noise filters. they do exactly what there titled to do. and if that doesnt work, then worst case, sell it all on ebay, and just start over from scratch. but study how they hooked it all up so you could get a good idea of what your going to do. but if ur not that confident in stereo's take it to a well known local car shop.
i have a ALPINE IVA-C801 and it had enough wires to wire up fort knox for there cameras. so i took it to circuit city and they installed it for me for like 70 bucks. so just go that rout if u have no idea what ur doin..
dont be mad at know knowin what ur doin cuz its simple to blow somethin or start a fire or even make **** not work or ur car not start.. so be careful my man!!!
good luck and **** u flamers.. he needs help not flames from u so called "PRO'S" that "KNOW IT ALL" and expect others to know too
Thread
Thread Starter
Forum
Replies
Last Post



