my future setup goals
Thread Starter
Joined: Sep 2002
Posts: 149
Likes: 0
From: NORCAL, CA
my future setup goals
i currently have a b18c1 block.....
my plans for it is ctr pistons
itr tranny
b16a2 head
portflow port & polish
skunk2 stage 2 cams
smsp header
hondata
im pretty new to building motors, my old car came with a stock motor and all i really had was bolt on, also, all of this is going into a 97civic hatchback
my question to you guys, is for the head, what is the best valvespring should i use, retainers, for my setup, im not really too familiar with the head so i dont really know what i should change and what i should leave stock
this will all be in a street car, all intereior, what whp should i expect...thank you for everyones help ahead of time
my plans for it is ctr pistons
itr tranny
b16a2 head
portflow port & polish
skunk2 stage 2 cams
smsp header
hondata
im pretty new to building motors, my old car came with a stock motor and all i really had was bolt on, also, all of this is going into a 97civic hatchback
my question to you guys, is for the head, what is the best valvespring should i use, retainers, for my setup, im not really too familiar with the head so i dont really know what i should change and what i should leave stock
this will all be in a street car, all intereior, what whp should i expect...thank you for everyones help ahead of time
Joined: Oct 2003
Posts: 186
Likes: 0
From: U.O.P stockton, Ca, unitedstates
Re: my future setup goals (Infamous)
why dont you leave the gsR bottom block stock, and do all headwork.. iv'e seen alot of all motor cars with built "race heads" and some decent "cams" and a
good *** "header", out there hitting high 12's.... portflow is a good company!
try giving CBI in stockton a call, they to, have bomb *** heads!
good *** "header", out there hitting high 12's.... portflow is a good company!
try giving CBI in stockton a call, they to, have bomb *** heads!
Honda-Tech Member
Joined: Apr 2002
Posts: 2,526
Likes: 0
From: Northern, California
Re: my future setup goals (VoLTRoNx916)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VoLTRoNx916 »</TD></TR><TR><TD CLASS="quote">cbi...custom build imports??</TD></TR></TABLE>
Trending Topics
Honda-Tech Member
Joined: Apr 2002
Posts: 2,526
Likes: 0
From: Northern, California
Re: (CoryTurner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoryTurner »</TD></TR><TR><TD CLASS="quote">what color was it?
was it this one?
</TD></TR></TABLE>might have been, dayam i thought it was a crx, i need ******* glasses
was it this one?
</TD></TR></TABLE>might have been, dayam i thought it was a crx, i need ******* glasses
Honda-Tech Member
Joined: May 2003
Posts: 2,830
Likes: 0
From: kzoo, small town mi, usa
Re: (civicbhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicbhatch »</TD></TR><TR><TD CLASS="quote">why not just get skunk2 valvesprings and retainers to go along with the cams?</TD></TR></TABLE>
what he said.
what he said.
Thread
Thread Starter
Forum
Replies
Last Post
94lsboost
Forced Induction
8
Feb 25, 2005 07:54 PM
B18cHatch06
All Motor / Naturally Aspirated
3
Dec 19, 2004 11:15 AM
