Hey guys, I have a partial turbo kit that I threw together a while ago in my free time. Now I'm selling it cause I'm broke as a joke! I'm selling it as a whole and it includes these items:
1) Audi KKK 26 Turbocharger(2.25" inlet, 2" outlet compressor: 2.25" exhaust outlet)
2) Audi External Wastegate w/ valve diameter of 30mm
3) Mild Steel manifold w/ external wastegate and a t3/kkk flange.
4) Mandrel Bent 2.5" downpipe and 1 5/8" mandrel bent wastegate dump tube

Price: $500 shipped o.b.o.
The turbo and wastegate came off of a Audi w/ 74k on the odometer but the turbo spins freely and has damn near zero shaft play. The turbo is oil lubricated and water cooler. KKK26 are a pretty decently sized turbo when it comes to stock turboed cars and would do fine on any 1.6-1.8 liter b series motor and I wouldn't hesitate to throw it on a B20 either! The wastegate has stock boost at about 9psi but we all know how we can change that for a few bucks. The manifold is made of schedule 40 steel elbows and piping, w/ a 3/8" laser cut head flange and t3 flange which has been drilled w/ four additional holes to allow the kkk turbo to fit aswell. The downpipe is made of 2.5" mandrel bent mild steel and has a 3/8" thick laser cut flange as well. The wastegate dump tube is 1 5/8" mild steel that follows the same route as the downpipe and dumps below the oil pan to help keep that engine bay from getting too dirty.

This would be a great start for someone who wants to put together a decent kit to start off with. Feel free to email me or PM me w/ any questions or even offers!

And now on to the pictures... there is one picture w/ a turbonetics t3/t4 mounted to show that this manifold could be used down the road for a larger true t3 flanged turbo also a picture of the kkk26 next to that turbo to show the size relation of it. the Turbonetics is a .57 trim 60 AR t3/t4

 

bump numero uno!

 

Deuce!

 

hey thanks for the flanges jesse, they look to be 3/8 and not 1/2 though ? maybe i just got one of the older batches ehh? BTW, how do you cut the hole for that style manifold ?

 

bump for offers!?

 

Hows it going.I'm interested in your kit but I'm located in Canada I don't know if that would be a problem for you to ship or if your willing to ship at all.Could you let me know if you would be willing to ship to Canada.I'm located in Ottawa but I could have it shipped to Toronto if that would be easier and cheaper.I own a 1996 Teg so will this bolt right on?What car were you going to be applying this kit on.This would be for a b18b1.Let me know if you would be interested.

Thanks,

Adam

 

You got PM.

 

how much for the mainfold?

 

Sold!

Hey, I have kkk flanges being made right now and I could make another manifold using one of them if you're in a bind. talk to ya later.