FS: Lot of B-series turbo parts
Car got stolen before I can even start my turbo project, so all the parts has to go.
Custom Manifold, no crack....................................... $220
Garrett t3/t4 turbo, perfect condition, no foul play.......$375
Tial Wastegate, 35 mm.............................................$22 0
Apexi twin chamber BOV.......................................... $165
RS 550 Injectors......................................... .............$100
I brought all these parts used, don't remember exactly how old they are, but I'm sure none of them has more than 30,000 miles. All price listed above are not include shipping, buyer responsible for all shipping cost unless other arrangement has been made.
I also have an brand new intercooler, which was made by one of the member in homemadeturbo.com (Tyrus), I will let it go for $240, picture available upon request.
One more, I purchased some piping from summitracing.com, two (2) 90 degree bend and one 180 bend, I will let them go for $70, picture also available upon request.
Lastly, custom 2.5 inch downpipe with e-cut also with a brand new e-cut, $380 for both downpipe and e-cut, picture available upon request as well.
I think that's it for now, please email me for any question or offers tkwong78@hotmail.com
Modified by Civic Type-R at 6:29 PM 12/16/2003
Custom Manifold, no crack....................................... $220
Garrett t3/t4 turbo, perfect condition, no foul play.......$375
Tial Wastegate, 35 mm.............................................$22 0
Apexi twin chamber BOV.......................................... $165
RS 550 Injectors......................................... .............$100
I brought all these parts used, don't remember exactly how old they are, but I'm sure none of them has more than 30,000 miles. All price listed above are not include shipping, buyer responsible for all shipping cost unless other arrangement has been made.
I also have an brand new intercooler, which was made by one of the member in homemadeturbo.com (Tyrus), I will let it go for $240, picture available upon request.
One more, I purchased some piping from summitracing.com, two (2) 90 degree bend and one 180 bend, I will let them go for $70, picture also available upon request.
Lastly, custom 2.5 inch downpipe with e-cut also with a brand new e-cut, $380 for both downpipe and e-cut, picture available upon request as well.
I think that's it for now, please email me for any question or offers tkwong78@hotmail.com
Modified by Civic Type-R at 6:29 PM 12/16/2003
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reaction360 »</TD></TR><TR><TD CLASS="quote">whats the AR on the exhaust side of the turbo? and will u go lower for pick up? thanks</TD></TR></TABLE>
.63 on the hot side
.60 on the cold side
Modified by Civic Type-R at 6:35 PM 12/18/2003
.63 on the hot side
.60 on the cold side
Modified by Civic Type-R at 6:35 PM 12/18/2003
Thread
Thread Starter
Forum
Replies
Last Post
k20tuRbo
Classifieds: Forced Induction
11
May 12, 2009 06:48 AM



