How much should i be looking to spend, to get a gsr (b18c1) head for my b18a1 non-vtec motor.....

 

you can get a b16 head compleat without distrubitor for about $400
you can get a gsr head with out distrubitor for about $550 -700

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by riceball777 &raquo;</TD></TR><TR><TD CLASS="quote">you can get a b16 head compleat without distrubitor for about $400
you can get a gsr head with out distrubitor for about $550 -700</TD></TR></TABLE>

b16 better flow!!!
and yeap those are about the right prices...

 

i have a jdm gsr head minus the dizzy for $450.00. the head has 60k on it and the jdm cams are much better than the 99-00 si cams. reason for selling is i'm doing a fuuly built head from JG

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jaycuzz1 &raquo;</TD></TR><TR><TD CLASS="quote">i have a jdm gsr head minus the dizzy for $450.00. the head has 60k on it and the jdm cams are much better than the 99-00 si cams. reason for selling is i'm doing a fuuly built head from JG</TD></TR></TABLE>

sorry to tell you this but Ill be carefull to deal with a NOOB

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mr.beeks &raquo;</TD></TR><TR><TD CLASS="quote">

sorry to tell you this but Ill be carefull to deal with a NOOB
</TD></TR></TABLE>

I've learned from experience its a good idea to do that......

 

Get the GSR head, sacrificing compression over a slightly better flowing head isn't worth it. Espeically if you are getting a 1st gen B16 head which do not flow worth **** any way.