ITR JDM side skirts vs. USDM side skirts any difference between them?

 

Nope,..same,same
now DC5--diff car diff story.

what I've seen is the stock GSR/LS sides are diff then ITR sides,..smooth plastic where as GSR/LS a tiny more rough.??

 

ITR=painted, every other dc2 integra = non painted

 

So both the USDM and JDM side skirts are painted, all others USDM RS/LS/GS/GSR are not painted?

Thanks for the feedback...

 

is there anyone that making a copy of them ??

i rang my local honda dealer , they said they cant get them anymore ....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Day Walker &raquo;</TD></TR><TR><TD CLASS="quote">is there anyone that making a copy of them ??

i rang my local honda dealer , they said they cant get them anymore .... </TD></TR></TABLE>


I have a set in MINT condition if you need them.

 

i have a set as well, but the driver side if a little scratched underneath. willing to get rid of pretty cheap.

 

Reason why I ask is that I have access to a few used sets off of JDM ITRs. If anyone's interested, email me at: cmgi8@yahoo.com or just im me here.. It comes in various colors all ITR painted (CW, PY)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PlikityPLAH &raquo;</TD></TR><TR><TD CLASS="quote">ITR=painted, every other dc2 integra = non painted</TD></TR></TABLE>

theres only two kind of dc2 integras and everything else is dc4
ITR, GSR=dc2

 

CivicSiR94,

There's no such think as a DC4...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cmgi8@yahoo.com &raquo;</TD></TR><TR><TD CLASS="quote">CivicSiR94,

There's no such think as a DC4...
</TD></TR></TABLE>
DC4: 2dr B18B
DC2: 2dr B18C

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
If you unsure on anything about your Integra, chances are you can find out for sure from your Vehicle Identification Number. This guide is valid only for the USA market 3rd generation Integras, other markets and generations may differ.

Example VIN
JH4DB7561WS000001

Separate the VIN like so

JH4-DB7-5-6-1-W-S-000001

JH4=Honda Motor Co. Ltd. Acura Passenger Vehicle

DB7 = Body and engine type.
DB7: 4dr B18B
DB8: 4dr B18C
DC4: 2dr B18B
DC2: 2dr B18C

5= Body and transmission type
3: 2dr 5spd
4: 2dr auto
5: 4dr 5spd
6: 4dr auto

6= Vehicle grade
1: Type R
4: RS
5: LS
6: GS/SE
8: GS-R
9: GS-R w/ leather seats

1= check digit, disregard

W= Model year
R: 1994
S: 1995
T: 1996
V: 1997
W: 1998
X: 1999
Y: 2000
1: 2001


S= Factory Code
S: Suzuka, Japan

000001= serial number

Looking at the example VIN you can tell that the Integra is a 1998 GS 4dr manual.
</TD></TR></TABLE>

 

there is a difference in the side skirts of the JDM and USDM. Pay more attention and research stop assuming

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by QuanKwan &raquo;</TD></TR><TR><TD CLASS="quote">there is a difference in the side skirts of the JDM and USDM... </TD></TR></TABLE>


.....such as?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by QuanKwan &raquo;</TD></TR><TR><TD CLASS="quote">there is a difference in the side skirts of the JDM and USDM. Pay more attention and research stop assuming</TD></TR></TABLE>

get your head outta...

 

USDM & JDM ITR
-color matched
-the corner of the side skirt is squared off

USDM RS/LS/SE/GS/GSR
-black plastic, unpainted
-the corner of the side skirt is rounded

i don't have pictures of a close up of the corners of the side skirts but there is that difference.

 

I was thinking the same thing, but I wasn't sure enough to refute anyone.

But I think the difference is just between ITR and non-ITR, not JDM and USDM.

 

And they are different part numbers.

 

CivicSiR94,

My bad, didn't know a DC4 existed...

sys3rror,

Thanks for correcting me...