can someone tell me the bends i need for my ls turbo
Joined: Feb 2003
Posts: 406
Likes: 0
From: San Diego, Ca, USA
Joined: Sep 2003
Posts: 708
Likes: 0
From: Somerset, NJ, USA
DownBoyDown gave you the damn answer but you were obviously too lazy to read it....
Pipe #8 & #6: (You will need to order two of these) 81ZX3031U 180 Degree Mandrel-Bent Aluminized Tubing, (A/B)=12", (C)=5", ID=2-3/8", OD=2-1/2" Each 13.95
Pipe #5: 81ZX2953P 90 Degree Mandrel-Bent Aluminized Tubing, (A/B)=10", (C)=5", ID=2-3/8", OD=2-1/2" Each 9.95
Pipe #9: 81ZX3035N 180 Degree Mandrel-Bent Aluminized Tubing, (A/B)=24", (C)=5", ID=2-3/8", OD=2-1/2" Each 22.95
It even includes the part numbers from JCwhitney
Pipe #8 & #6: (You will need to order two of these) 81ZX3031U 180 Degree Mandrel-Bent Aluminized Tubing, (A/B)=12", (C)=5", ID=2-3/8", OD=2-1/2" Each 13.95
Pipe #5: 81ZX2953P 90 Degree Mandrel-Bent Aluminized Tubing, (A/B)=10", (C)=5", ID=2-3/8", OD=2-1/2" Each 9.95
Pipe #9: 81ZX3035N 180 Degree Mandrel-Bent Aluminized Tubing, (A/B)=24", (C)=5", ID=2-3/8", OD=2-1/2" Each 22.95
It even includes the part numbers from JCwhitney
Thread
Thread Starter
Forum
Replies
Last Post
0TT
Welding / Fabrication
3
Feb 13, 2008 05:13 AM