Anybody have the wire diagram for a 91 integra distributor, i'm wiring up a 93 integra distributor onto a 91 motor, (running the 91 PR4 ECU) HAsport said i should just get another distributor, but i dont feel like spending the cash, so i'm gonna wire up the 93 dist. i got the wire guide for the 93 off of iceman's honda manuals page, but there aren't any there for a 91.

 

here is the 91

and here's the 93

 

http://images.andale.com/img/i...0.jpg#

http://images.andale.com/img/i...1.jpg

i'm merging these

 

Why are you using a obd-1 distributor on a obd-0 engine anyway

If you're gonna do a swap, please do it right.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Devlins 91LS &raquo;</TD></TR><TR><TD CLASS="quote">Why are you using a obd-1 distributor on a obd-0 engine anyway

If you're gonna do a swap, please do it right.</TD></TR></TABLE>

Exactly. To be honest it will not work. You can't use an OBD0 distributor with an OBD1 ECU or vice versa.

 

yah thanks guys, i broke down and bought the right dist, on ebay for 140, i just thought that there might be a way to get it to crank.

 

is it possible to "wire up" an 88 dx CRX distributor (D15) onto the 91 ls motor? the CRX distributor has only like 5 wires, and the integra ls harness has like wires.

here is the CRX dist wires(they don't follow the manual)



or http://webpages.charter.net/plappr/Dist.JPG

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gomer124 &raquo;</TD></TR><TR><TD CLASS="quote">is it possible to "wire up" an 88 dx CRX distributor (D15) onto the 91 ls motor? the CRX distributor has only like 5 wires, and the integra ls harness has like wires.</TD></TR></TABLE>

It will not bolt onto the head and besides it's also for a DPFI setup. That's the reason there is 2 missing wires which would be for the CYP sensor. You will need a 90-91 Integra distributor, there are no substitutes from other cars for this.