i just bought a zc motor and i'm replacing the clutch and so on. i was just wondering if a stock civic clutch would be able to hold the power of a zc with i/h/e. my friend works at kragen so i'm able to get the clutch for about $110.
also anyone in here knows what axles to use on a 92 zc hydro tranny. tried the 91 integra but doesn't seem to fit. plus any info or website about 92+ zc motor will be helpful. thanks

 

also is it possible to use the stock pressure plate with a 6 puck or street disc

 

stock clutch will be fine with those mods.. im guessing you're using a zc tranny?

 

if its a 92+ zc sohc, im assuming you could use 92+ axles out a hatch or coupe