FS: the rest of my remaining jdm "junk"
Thread Starter
Trial User
Joined: Sep 2000
Posts: 2,265
Likes: 0
From: LA/chicago, USA
FS: the rest of my remaining jdm "junk"
PRICES HAVE BEEN LOWERED!!
here's the rest of the stuff/extras left over from my shitbox:
JDM ITR head complete with cams/all valvetrain/fuel rail/injectors - $1000 OBO, also willing to part pieces off (cams, valvetrain, bare head, etc.)
apex power FC w/commander and datalogit kit - $IM
- also have the apexi obd1 -> obd2 converter to use this on OBD1 cars
Toda spec A cams used ~5k miles no signs of wear - $700
Spoon cam gears GEN1 - $200
JDM ITR throttle body - $250
JDM ITR intake manifold - $SOLD
JDM ITR distributor - $200
C's short shifter - $200 shipped; seems it will work with all b series linkage
M's hyper filter charger thingy (same crap that mario is selling except mine is used a tad bit longer than his
) - $150 shipped
Bride zeta 2 black (discontinued one) mint condition, only used 3 months (1 track event and a few kaaa shows/not daily driven) - $695 seat only, $795 with rails
JDM ITR non-SRS wheel - $200
greddy oil cooler kit for B18C GSR (NEW) - $300 (retail $500)
ngk blue plug wires normal ones - $SOLD
comptech springs for ITR (not sure on the drop never used it, bought as extras in case i needed to pull my own suspension off) - $100
endless VN9500 front pads for ITR new - $85 shipped
prelude 290cc injectors - $75
usdm itr floormats - $SOLD
bf goodridge drag radials 225/50/15 used for 3 passes - $175 OBO
ITR 5 lug rims only painted flat black including center caps - $295
Vision front and rear upper a-arms fit DC/EG (used at one track event, still looks brand new) MAKE OFFER
b series shift linkage - $SOLD
b series valve cover powdercoated gunmetallic - $95 PENDING
b20 aluminum AC bracket powdercoated gunmetallic (new) - $115
p72 ac bracket - offer
have all the misc B into EG mounts, make offer; some have ES inserts in them i'll just throw it in
EG black door panels power w/tweeter holes - $75 BARE, NO SWITCHES AND/OR PARTS FOR POWER WINDOWS/DOOR LOCKS
that's all i can think of for now, when i can remember more i'll put it up
Modified by ITRinEJ1 at 1:15 PM 12/16/2003
here's the rest of the stuff/extras left over from my shitbox:
JDM ITR head complete with cams/all valvetrain/fuel rail/injectors - $1000 OBO, also willing to part pieces off (cams, valvetrain, bare head, etc.)
apex power FC w/commander and datalogit kit - $IM
- also have the apexi obd1 -> obd2 converter to use this on OBD1 cars
Toda spec A cams used ~5k miles no signs of wear - $700
Spoon cam gears GEN1 - $200
JDM ITR throttle body - $250
JDM ITR intake manifold - $SOLD
JDM ITR distributor - $200
C's short shifter - $200 shipped; seems it will work with all b series linkage
M's hyper filter charger thingy (same crap that mario is selling except mine is used a tad bit longer than his
) - $150 shippedBride zeta 2 black (discontinued one) mint condition, only used 3 months (1 track event and a few kaaa shows/not daily driven) - $695 seat only, $795 with rails
JDM ITR non-SRS wheel - $200
greddy oil cooler kit for B18C GSR (NEW) - $300 (retail $500)
ngk blue plug wires normal ones - $SOLD
comptech springs for ITR (not sure on the drop never used it, bought as extras in case i needed to pull my own suspension off) - $100
endless VN9500 front pads for ITR new - $85 shipped
prelude 290cc injectors - $75
usdm itr floormats - $SOLD
bf goodridge drag radials 225/50/15 used for 3 passes - $175 OBO
ITR 5 lug rims only painted flat black including center caps - $295
Vision front and rear upper a-arms fit DC/EG (used at one track event, still looks brand new) MAKE OFFER
b series shift linkage - $SOLD
b series valve cover powdercoated gunmetallic - $95 PENDING
b20 aluminum AC bracket powdercoated gunmetallic (new) - $115
p72 ac bracket - offer
have all the misc B into EG mounts, make offer; some have ES inserts in them i'll just throw it in
EG black door panels power w/tweeter holes - $75 BARE, NO SWITCHES AND/OR PARTS FOR POWER WINDOWS/DOOR LOCKS
that's all i can think of for now, when i can remember more i'll put it up
Modified by ITRinEJ1 at 1:15 PM 12/16/2003
Thread Starter
Trial User
Joined: Sep 2000
Posts: 2,265
Likes: 0
From: LA/chicago, USA
Re: (.jefs0ng)
all PM answered.
not sure what the part number is off the top of my head but it is still stamped on there so i'll look tomorrow.
jefsong you are welcomed to come by and try it on
not sure what the part number is off the top of my head but it is still stamped on there so i'll look tomorrow.
jefsong you are welcomed to come by and try it on
Trending Topics
Thread Starter
Trial User
Joined: Sep 2000
Posts: 2,265
Likes: 0
From: LA/chicago, USA
Re: (ITRinEJ1)
Banned
Joined: Jul 2001
Posts: 10,768
Likes: 0
Might I ask what the difference in gen1 and gen2 are? they.. look like toda cams.. I think I remember someone saying them being the same?
I'd love to come try it on but I'm too far just to take a trip and try an intake haha.. maybe if I found a stock intake arm to use..
I'd love to come try it on but I'm too far just to take a trip and try an intake haha.. maybe if I found a stock intake arm to use..
Thread Starter
Trial User
Joined: Sep 2000
Posts: 2,265
Likes: 0
From: LA/chicago, USA
Re: (.jefs0ng)
the intake opening is like 3.5" so if the j's opening is about that big, it should fit. and i have tried it with stock arm and it seems to work too.
toda makes the spoon so that's why the similarity. difference is gen1 teeth are steel and gen2 are aluminum and the bronze color vs. all silver. honestly i like the gen1s way better!!
toda makes the spoon so that's why the similarity. difference is gen1 teeth are steel and gen2 are aluminum and the bronze color vs. all silver. honestly i like the gen1s way better!!
Banned
Joined: Jul 2001
Posts: 10,768
Likes: 0
Re: (ITRinEJ1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITRinEJ1 »</TD></TR><TR><TD CLASS="quote">the intake opening is like 3.5" so if the j's opening is about that big, it should fit. and i have tried it with stock arm and it seems to work too.
toda makes the spoon so that's why the similarity. difference is gen1 teeth are steel and gen2 are aluminum and the bronze color vs. all silver. honestly i like the gen1s way better!!</TD></TR></TABLE>
.. just color? If so are you willing to do 175? As I am lookin at 3 people's cam gears right now.. I'd come pick them up but just for cam gears a drive to la in my poor freeway gas mileage mobile won't like it.. btw.. are those newzor?
toda makes the spoon so that's why the similarity. difference is gen1 teeth are steel and gen2 are aluminum and the bronze color vs. all silver. honestly i like the gen1s way better!!</TD></TR></TABLE>
.. just color? If so are you willing to do 175? As I am lookin at 3 people's cam gears right now.. I'd come pick them up but just for cam gears a drive to la in my poor freeway gas mileage mobile won't like it.. btw.. are those newzor?
Honda-Tech Member
Joined: May 2000
Posts: 3,073
Likes: 0
From: EXIT Real World
Re: FS: the rest of my remaining jdm "junk" (ITRinEJ1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITRinEJ1 »</TD></TR><TR><TD CLASS="quote">
M's hyper filter charger thingy (same crap that mario is selling except mine is used a tad bit longer than his ) - $150 shipped</TD></TR></TABLE>
LOL
Yeah, we're cool dudes for having that filter.
Oh wait...Kengs has the better cf model, I guess we're not that cool.
M's hyper filter charger thingy (same crap that mario is selling except mine is used a tad bit longer than his
) - $150 shipped</TD></TR></TABLE>LOL
Yeah, we're cool dudes for having that filter.
Oh wait...Kengs has the better cf model, I guess we're not that cool.
Joined: Sep 2003
Posts: 121
Likes: 0
From: FUCK THEIVES, va, USA
Re: FS: the rest of my remaining jdm "junk" (ITRinEJ1)
do u still have the eg power door panels, does it come with everything i need for pwoer windows email me at SiRcyrus54@yahoo.com
Honda-Tech Member
Joined: Feb 2002
Posts: 624
Likes: 0
From: Sexy no Jutsu
Re: FS: the rest of my remaining jdm "junk" (ITRinEJ1)
payment sent for NGK wires!!! Please check paypal account okay....
Please email me at imaginationr@hotmail.com for to confirm payment
Thanks
Please email me at imaginationr@hotmail.com for to confirm payment
Thanks
