I need some good pics of 92-95 civic coupes

-93 ej1 milano red ex
-jdm folding mirrors
-jdm healights
-jdm corners
-jdm door panels
-jdm 16x7 WORK RS betas 2 pc
-VIS c/f hood
-intake exhaust
-ecu tunned by H.R.T.
Junkyard build up... more soon to come post pics later when cleaned up...
before (bought for 650 running)
now just without the rims

Any ECU tunning needed let me know we do Sk2, spoon, mugen, rpt, xs and more. Custom program specalist!!! Turbo and NOS welcome. Email me!!!


Modified by JDMdippinEJ1 at 3:14 AM 11/26/2003

 

Here is my rice machine! The ubber Ghey Rice wing is gone and replaced with a WW 3 pc Flush fount flare wing looks much cleaner

















Complete "current" mods list

* = have but not yet installed

Exterior Mods:

Tsunami T1 hard lip
Grill Craft 3 pc kit
Denji halo Carbon housing Projectors
True JDM Stanley Corner lenses
Fiber Images Carbon hood W/ Sparco pins
JDM Mugen S-90x Side Skirts
JDM Civic Type R rear lip
JDM Endless Tuner aluminum wing
*WW 3pc Flush wing
JDM 50 / 50 tail lights
*Baer Big brake kit W/ Stainless steel braided lines 13" rotor & 12" rotor
*carbon Fiber Fuel door
*S2000 Antenna

Interior Mods:

Hayame Racing seats
ACC yellow Molded Carpet
JDM ITR floor mats
Momo Carbon pedals
OEM JDM dead pedal
Momo Fighter Shift ****
OEM yellow Wrapped steering wheel
Leather wrapped back seats with Extra bolster
Leather wrapped door panel inserts
Custom 145mph carbon fiber reverse indigo gauges
Auto meter 3 gauge pillar pod
- CF Air fuel Ratio
- CF water temp
- CF oil press
Auto Meter Custom Dash pod
- CF 5" Monster tach 10,000rpm
- CF Volts
- CF Vacuum
* Sparco 3 point harnesses
* 22pc Carbon fiber dash kit
* Carbon fiber gauge bezel
* Carbon fiber Eye brows (for head lights)
* OEM JDM optional Audio consol
* OEM JDM arm rest with Yellow wrapped padding
* Apex-I S-afc - H22
* AME Competion Series 4 point Roll cage Powder coated yellow

Performance:
Injen 3" R&D cold air intake
Air Mass 4-2-1 header
Arospeed cat back 2 ¼” mandrel bent
Gude head (street - Strip)
Exedy stage 2 Clutch
Fidanza flywheel
Batxton sleeves
JE 9.5:1 pistons W/ shotpeened Si rods
Zex 85hp jet
Much more lil' goodies

Built all motor H22 in the works Hopefully firing off jan 1 04

Audio:
Alpine head
Alpine Type R component set 6.5”
Alpine Type R 6.5”
2) Xtant 12” Hex Subs
JL audio 300.4
JL audio 500.1

148.3 db Tuned to 30 Hz


Rollers and stoppers:
17” Arospeed Techno R’s W/ Nitto
*Baer Big brake conversion 13” & 12” Slotted rotors
Earls Stainless Steal lines

Suspension:
RK Tuning front upper, rear upper, front lower and rear lower strut bars
Neuspeed Race Springs
KYB AGX adj shocks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civiksiracer1 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civiksiracer1 &raquo;</TD></TR><TR><TD CLASS="quote">Here is my rice machine! The ubber Ghey Rice wing is gone and replaced with a WW 3 pc Flush fount flare wing looks much cleaner




</TD></TR></TABLE>

To each their own.
Personally, I think if you removed that lunch table that's on your trunk, that weird assed front bumper, and put on a stock bumper with an agressive lip, it would look nicer.
but it's cool.. (for 1997).. have a nice day

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamsterBall &raquo;</TD></TR><TR><TD CLASS="quote">

but it's cool.. (for 1997).. have a nice day </TD></TR></TABLE>

What the? I don't see any pics of 1997 cars here.
But yes. Personally I would ditch the front end and put the stock EX one on..or slap a spoon lip or CTR lip on it. And then get rid of that "lunch table" that's bolted onto your trunk.

ing the color/paint job/corner lenses

 

Why is it that most people always put engine stuff last on there list of things to do? Future plans h22a..... I did a motor swap before I lowered my car!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamsterBall &raquo;</TD></TR><TR><TD CLASS="quote">

To each their own.
Personally, I think if you removed that lunch table that's on your trunk, that weird assed front bumper, and put on a stock bumper with an agressive lip, it would look nicer.
but it's cool.. (for 1997).. have a nice day </TD></TR></TABLE>


Ummm, that is a stock bumper with an agressive lip . The car isn't all that bad, mainly the wing that rices it out the worst.

 

some people dont have $2k to dump on an engine, compared to $300 springs <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mattssi &raquo;</TD></TR><TR><TD CLASS="quote">Why is it that most people always put engine stuff last on there list of things to do? Future plans h22a..... I did a motor swap before I lowered my car! </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by haku-jitodai &raquo;</TD></TR><TR><TD CLASS="quote">

What the? I don't see any pics of 1997 cars here.
But yes. Personally I would ditch the front end and put the stock EX one on..or slap a spoon lip or CTR lip on it. And then get rid of that "lunch table" that's bolted onto your trunk.

ing the color/paint job/corner lenses</TD></TR></TABLE>


he meant that style would have been cool back in 1997 you moron.

car looks super cheesy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sirhatchalot5 &raquo;</TD></TR><TR><TD CLASS="quote">


he meant that style would have been cool back in 1997 you moron.

car looks super cheesy </TD></TR></TABLE>

Werd!

 

Man dont listen to these guys! i like it, i have the same lip and its all black! People here all like the 15 inch bronze rims, with cf lip, vision side markers... personally i hate jdm stuff now, so over played!!

Nice car! keep it up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90CivicDx &raquo;</TD></TR><TR><TD CLASS="quote">Man dont listen to these guys! i like it, i have the same lip and its all black! People here all like the 15 inch bronze rims, with cf lip, vision side markers... personally i hate jdm stuff now, so over played!!

Nice car! keep it up</TD></TR></TABLE>


I agree 100%,

 

here's my coupe.for specs,go here:
http://www.hondashowoff.com/profile.php?id=3230
couple rolling shots:



still shots:



Sparse interior:


and before anybody says it-i know i shouldn't mountmy harness that way.hopefully in the next week i'll finish the door bars and harness bar.

real deal rollers:


everybody seemed to like this sticker before when i posted it:


got tons more pics if you want
chris

 

here's my whip...

 

hey...umm i know this is a really random question, but what brand lug nuts are those?

 

they're made by Pilot(the same company that makes aftermarket lights).they stopped producing them a while ago.got these about three years ago for $40 from a friend who runs a shop....
if you wanted a set,Zenki also makes lugs that are identical.you can get them from HeelToeAuto for a good price.
chris

 

ok....

Ubber ghey lunch table wing is gone, It was nothing I put on the car, Here ill post a pic of it when I first bought it.



I now have a Wings West 3 pc flush wing and a new trunk lid...




The car had a B18c1 in it for about 5 months and I threw a rod... the H22 is purchased and is sittin my garage just waiting on a few lil things... mounts, dist... lil stuff.

I had a CF "spoon" style lip on my car it lasted bout 5 months till I finally bottomed out for the last time and literally shattered it... New T1 lip has been bottomed out mucho times and still kicking... The next step for a Bumper is either C-westII or the new Aki Fuel Bumper...
I like to stay away from band wagons and just buy **** I like and I think will look cool. I have been threw trial and error but hey, thats what Ebay is for!! My car is Aimed more for show whichI know is kinda shuned around here but, Its daily driven and has won in the neighborhood of 30 trophies. As of right now the current project is... Mounting 7.2" Monitor in JDM optional Audio console and Custom fitting my 8 disc changer in my glove box with a Fan and a CF N20 guage.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamsterBall &raquo;</TD></TR><TR><TD CLASS="quote">

To each their own.
Personally, I think if you removed that lunch table that's on your trunk, that weird assed front bumper, and put on a stock bumper with an agressive lip, it would look nicer.
but it's cool.. (for 1997).. have a nice day </TD></TR></TABLE>

lol that is a lip on that car... an adgressive snow plow but still at lip at that

::just playing::

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">



</TD></TR></TABLE>


JDM Corners, Tsunami Front and Projectors??

btw nice house

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bobby-SiR &raquo;</TD></TR><TR><TD CLASS="quote">


JDM Corners, Tsunami Front and Projectors??

btw nice house </TD></TR></TABLE>
I don't see JDM corners those are fake vision corners.

 

they say Stanley on them... not Vision, I thought Stanley corners were the "real" jdm corners...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97itr86 &raquo;</TD></TR><TR><TD CLASS="quote">
I don't see JDM corners those are fake vision corners.</TD></TR></TABLE>

I think you know what i mean

 

damn. i need to get a wing and lip for my car.



nate

 

This was right after I got the car.

And Now..