Hey, i wanted some input from you all out there since it seems like you can really help me. I am currently planning a big project on my 94' LS. I know it is going to take me a long time to complete this project since i plan to do all the work myself except for porting. Anyway, my goal in this project is to reach about 800-850hp and 650-700 ft/lbs of torque. I am sure that my stock non-vtech cannot handle this kind of power so i was wondering what engines and/or trannys i should be looking for to be able to reach these numbers. Also let me know if you have any suggestions or comments that would help me when working on this project. Right now i am preparing myself to start this project and i want to be 100% ready when i start it. Any comment will help.

Thanks.

 

Umm. If you have to ask what is needed to make 800 whp, then you don't need to be making 800 whp. Why don't you start by piecing together a nice turbo setup and getting your feet wet. People are getting 300 whp out of stock B18Bs.

 

 

thats the **** good post ..but newbie you can look at a post on page 2 of drag race inside j. dolce look at the hole thing lots of pics

 

go over to south florida performance, they are in FL. they can help u

 

800-850hp and 650-700 ft/lbs of torque. Have you any clue of what your talking about?? I also see thats your very first post. Hope you have tuff skin bro, because your gonna get ripped.

 

take a trip to SFP(south florida performance)..ask for frank.. or Pacific Performance..ask for steven... im sure they can help and will go easier on u then most of the H-T guys good luck on your project.


Modified by bruceleeroy at 7:14 PM 11/20/2003

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by odp27 &raquo;</TD></TR><TR><TD CLASS="quote">Hey, i wanted some input from you all out there since it seems like you can really help me. I am currently planning a big project on my 94' LS. I know it is going to take me a long time to complete this project since i plan to do all the work myself except for porting. Anyway, my goal in this project is to reach about 800-850hp and 650-700 ft/lbs of torque. I am sure that my stock non-vtech cannot handle this kind of power so i was wondering what engines and/or trannys i should be looking for to be able to reach these numbers. Also let me know if you have any suggestions or comments that would help me when working on this project. Right now i am preparing myself to start this project and i want to be 100% ready when i start it. Any comment will help.

Thanks.</TD></TR></TABLE>

Pull out $50,000 and go find yourself a good tuner and stop being a damn noobie.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by odp27 &raquo;</TD></TR><TR><TD CLASS="quote">"i plan to do all the work myself except for porting."

"my stock non-vtech" </TD></TR></TABLE>

No offense, but these 2 statements do not go well together at all

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by odp27 &raquo;</TD></TR><TR><TD CLASS="quote"> I am sure that my stock non-vtech cannot handle this kind of power.</TD></TR></TABLE>First thing to do in your project is to learn that it is vtec, not vtech.

 

correct the h is silent though

 

So did all our helpul advice help you.

Gotta love Honda-Teh.

 

i think if they left the h off the end of honda tech maybe it would help some people out.