How hard is this to do and what is needed if putting a LS in a auto EG? I drove a ek that had this done with a b18c and the pedals were kinds close together and I kept hitting the brake when I didn't mean to.

 

Do a search in the EG/Del Sol forum... there's a big thread that was done about a month ago with what steps are needed. Besides the normal stuff like hydrolic lines, slave clyinder, pedal assembly, linkage, etc, you're also going to have to either relocate the passenger side framerail mount or get a mount (like the HCP EG-AT mount below) that'll allow you to bolt a 5-spd transmission into the auto EG/DC chassis.

 

word thanks, looks like more than a pain in the *** then I thought.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJ B-Rad &raquo;</TD></TR><TR><TD CLASS="quote">I drove a ek that had this done with a b18c and the pedals were kinds close together and I kept hitting the brake when I didn't mean to.</TD></TR></TABLE>

The brake pedal in an auto is wider. Switch over to a smaller brake pedal from a manual and it'll be fine.

If you go to the Honda dealer, they can look up all the parts you need. There's a blow up diagram that shows every nut and bolt you'll ever need. The prices on the other hand...

Or find a junked manual EG and take everything off of it.

 

yeah only reason why I ask beacuse im looking to buy a eg and I found a nice one but it was a auto. I think im just going to find a 5speed instead.

 

auto to manual in a eg is baby stuff man, its easy did it in 3 1/2 hours

 

https://honda-tech.com/zerothread?id=672477